Skip to content

midi controller with knobs, faders, and maybe other stuff.

Notifications You must be signed in to change notification settings

naught101/midi_knobs

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

5 Commits
 
 
 
 
 
 
 
 

Repository files navigation

Arduino MIDI controller

A basic Arduino-based MIDI controller that uses pots and buttons to send MIDI. Works with any Atmega32u4-based Arduino (Leonardo, Micro, Pro Micro, Lilypad USB), and uses the USB port connect to the computer, using the MIDIUSB library.

Requirements

  • Atmega32u4-based Arduino (Leonardo, Micro, Pro Micro, Lilypad USB)
  • Potentiometers (~10k, but anything between 5k and 50k should work)
  • Some filter capacitors (~1µf give or take an order of magnitude) if your pots are noisy.
  • Buttons (momentary switches)
  • A case, if you want
  • some way of getting a USB connection from your computer to the Arduino.

Build

  • Hook the pots up (1: ground, 2 (wiper): analogue pin, 3: +5V)
  • Add a filter cap from ground to wiper for each potentiometer (pin 1 to 2), if you're getting noise on the pots.
  • Adjust the pin values as appropriate in the code and upload the sketch, and you should be good to go.

About

midi controller with knobs, faders, and maybe other stuff.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Other 100.0%