A python 3 library which helps in using nmap port scanner. The way this tools works is by defining each nmap command into a python function making it very easy to use sophisticated nmap commands in other python scripts. Nmap is a complicated piece of software used for reconnaissance on target networks, over the years new features have been added making it more sophisticated.
With this python3-nmap we make using nmap in python very easy and painless
For example in nmap if you want to scan for common ports you would to something like this
$ nmap your-host.com --top-ports 10
But in this python3-nmap script you would do something like this
import nmap3
nmap = nmap3.Nmap()
results = nmap.scan_top_ports("your-host.com")
# And you would get your results in json
You will notice each nmap command is defined as a python function/method. this make it easy to remember this in python and easily use them.
Again in nmap if you want to use the famous dns-brute script you would do something like this
$ nmap your-host.com --script dns-brute.nse
But in this python3 script again it's very easy you just do something like this
import nmap3
nmap = nmap3.Nmap()
results = nmap.nmap_dns_brute_script("your-host.com")
# And you would get your results in json
[
{
"address": "mail.your-host.com",
"hostname": "68.65.122.10"
},
{
"address": "www.your-host.com",
"hostname": "5.189.129.43"
}
]
Using this scripts is very easy, though it assumes you have nmap already installed, as it is the primary dependence required. Also this tools supports both windows and linux, it's cross platform so to say.
Installation
$ git clone https://github.com/wangoloj/python3-nmap.git
$ pip3 install -r requirements.txt
# Install nmap online
$ apt-get install nmap
# That's all is needed to get started
In nmap some commands require root privileges for example the command to identify OS requires root privileges;
$ nmap -O your-host.com
TCP/IP fingerprinting (for OS scan) requires root privileges.
QUITTING!
# Until you sudo
$ sudo nmap -O your-host.com
The same applies to the script to be able to run the os identifier you have to be a super user.
import nmap3
nmap = nmap3.Nmap()
os_results = nmap.nmap_os_detection("192.168.178.2") # MOST BE ROOT
[
{
"accuracy": "100",
"cpe": "cpe:/o:linux:linux_kernel:2.6",
"line": "45249",
"name": "Linux 2.6.14 - 2.6.34",
"osclass": {
"accuracy": "100",
"osfamily": "Linux",
"osgen": "2.6.X",
"type": "general purpose",
"vendor": "Linux"
}
},
{
"accuracy": "100",
"cpe": "cpe:/o:linux:linux_kernel:2.6.17",
"line": "45775",
"name": "Linux 2.6.17",
"osclass": {
"accuracy": "100",
"osfamily": "Linux",
"osgen": "2.6.X",
"type": "general purpose",
"vendor": "Linux"
}
},
{
"accuracy": "100",
"cpe": "cpe:/o:linux:linux_kernel:2.6.17",
"line": "45811",
"name": "Linux 2.6.17 (Mandriva)",
"osclass": {
"accuracy": "100",
"osfamily": "Linux",
"osgen": "2.6.X",
"type": "general purpose",
"vendor": "Linux"
}
},
{
"accuracy": "100",
"cpe": "cpe:/o:linux:linux_kernel:3.13",
"line": "60884",
"name": "Linux 3.13",
"osclass": {
"accuracy": "100",
"osfamily": "Linux",
"osgen": "3.X",
"type": "general purpose",
"vendor": "Linux"
}
}
]
The script is made of up the following classes, each holding different nmap abilities and scan types.
- Nmap
- NmapHostDiscovery
- NmapScanTechniques
In nmap if you want to identify versions you would run this kind of command
$ nmap 192.168.178.1 -sV
In this python script you would do something like this
import nmap3
nmap = nmap3.Nmap()
version_result = nmap.nmap_version_detection("your-host.com")
[
{
"cpe": [
{
"cpe": "cpe:/o:linux:linux_kernel"
}
],
"port": "80",
"protocol": "tcp",
"service": {
"conf": "10",
"extrainfo": "Ubuntu",
"method": "probed",
"name": "http",
"ostype": "Linux",
"product": "nginx",
"version": "1.14.0"
}
},
{
"cpe": [
{
"cpe": "cpe:/o:linux:linux_kernel"
}
],
"port": "443",
"protocol": "tcp",
"service": {
"conf": "10",
"extrainfo": "Ubuntu",
"method": "probed",
"name": "http",
"ostype": "Linux",
"product": "nginx",
"tunnel": "ssl",
"version": "1.14.0"
}
},
{
"cpe": [
{
"cpe": "cpe:/o:linux:linux_kernel"
}
],
"port": "2000",
"protocol": "tcp",
"service": {
"conf": "10",
"extrainfo": "Ubuntu Linux; protocol 2.0",
"method": "probed",
"name": "ssh",
"ostype": "Linux",
"product": "OpenSSH",
"version": "7.6p1 Ubuntu 4ubuntu0.3"
}
}
]
The following nmaps commands have been added to the following scripts
- get Nmap version details
import nmap3 nmap = nmap3.Nmap() results = nmap.nmap_version()
- Nmap top port scan
import nmap3 nmap = nmap3.Nmap() results = nmap.scan_top_ports("your-host")
- Nmap Dns-brute-script( to get subdomains )
import nmap3
nmap = nmap3.Nmap()
results = nmap.nmap_dns_brute_script("domain")
- Nmap list scan
import nmap3
nmap = nmap3.Nmap()
results = nmap.nmap_list_scan("your-host")
- Nmap Os detection
import nmap3
nmap = nmap3.Nmap()
results = nmap.nmap_os_detection("your-host");
- Nmap subnet scan
import nmap3
nmap = nmap3.Nmap()
results = nmap.nmap_subnet_scan("your-host") #Must be root
- Nmap version detection
import nmap3
nmap = nmap3.Nmap()
results = nmap.nmap_version_detection("your-host") # Must be root
The script offers nmap scan techniques also as python function/methods
-
nmap_fin_scan
import nmap3 nmap = nmap3.NmapScanTechniques() result = nmap.nmap_fin_scan("192.168.178.1")
-
nmap_idle_scan
import nmap3
nmap = nmap3.NmapScanTechniques()
result = nmap.nmap_idle_scan("192.168.178.1")
- nmap_ping_scan
import nmap3
nmap = nmap3.NmapScanTechniques()
result = nmap.nmap_ping_scan("192.168.178.1")
- nmap_syn_scan
import nmap3
nmap = nmap3.NmapScanTechniques()
result = nmap.nmap_syn_scan("192.168.178.1")
- nmap_tcp_scan
import nmap3
nmap = nmap3.NmapScanTechniques()
result = nmap.nmap_tcp_scan("192.168.178.1")
- nmap_udp_scan
import nmap3
nmap = nmap3.NmapScanTechniques()
result = nmap.nmap_udp_scan("192.168.178.1")
The script also offers support for map Added Nmap Host discovery techniques still as python function/methods
- Only port scan (-Pn)
- Only host discover (-sn)
- Arp discovery on a local network (-PR)
- Disable DNS resolution (-n)
NmapHostDiscovery
def nmap_portscan_only(self, host, args=None)
import nmap3
nmap = nmap3.NmapHostDiscovery()
results = nmap.nmap_portscan_only("your-host")
def nmap_no_portscan(self, host, args=None):
import nmap3
nmap = nmap3.NmapHostDiscovery()
results = nmap.nmap_no_portscan("your-host")
def nmap_arp_discovery(self, host, args=None):
import nmap3
nmap = nmap3.NmapHostDiscovery()
results = nmap.nmap_arp_discovery("your-host")
def nmap_disable_dns(self, host, args=None):
import nmap3
nmap = nmap3.NmapHostDiscovery()
results = nmap.nmap_disable_dns("your-host")
Nmap is a large tool, as you can see python3-nmap provides only things what you could say commonly used nmap features.
As we said, the script defines each set of nmap command as python function/methods. You can also pass arguments to those methods/function thus extending your capabilities for example. Let's say we want to scan top ports but also perform version detection .
import nmap3
nmap = nmap3.Nmap()
results = nmap.scan_top_ports("host", args="-sV")
You scan the the target IP using version detection ('-sV') to get the service and, the script performs a lookup in the CVE database. The nmap vulners script is part of the default Nmap installation, so you shouldn't need to install any other packages.
import nmap3
nmap = nmap3.Nmap()
results = nmap.nmap_version_detection("host", args="--script vulners --script-args mincvss+5.0")