Skip to content

Repo for printing and building printer top sitting spool holders (1 and 2.5 Kg filament)

Notifications You must be signed in to change notification settings

ocgeek/Spool-Holders

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

44 Commits
 
 
 
 
 
 

Repository files navigation

Spool-Holders

This repo contains files for printing and building spool holders which are planned to sit on the top of the printer

  • 5 / 2.5 / 1Kg flex spool holder (aka Robocop hand)
  • 2.5Kg spool holder
  • 1Kg spool holder
  • A sponge fit filament in line dust filter

If you are thinking about building a big spool holder for your printer you are in the right place

The 1Kg spool holder is composed by two parts. One arm holder which is fixed (bolted to top frame) to the top of the printer A put in place as you need arm with bearings for the 1Kg spools

This allows to have the flexibility to load either spools as needed without changing the configuration

The latest design the Flex Spool Holder for 5 / 2.5 and 1Kg spools has relocatable bearing carriages :-)

image

image

image

It fits a 300 build plate by an hair

image

The 2.5KG Spool Holder has been succesfully tested with :

  • eSun 2.5Kg Spools
  • 3DJake 2.3Kg Spools

IMG_20220502_134532

I used F625-2RS berings as guides for the spool

IMG_20220502_134517

image

image

image

image

About

Repo for printing and building printer top sitting spool holders (1 and 2.5 Kg filament)

Resources

Stars

Watchers

Forks