xFormers is a modular and field agnostic library to flexibly generate transformer architectures by interoperable and optimized building blocks.
The full documentation contains instructions for getting started, deep dives and tutorials about the various APIs. If in doubt, please check out the HOWTO. Only some general considerations are laid out in the README.
To install xFormers, it is recommended to use a dedicated virtual environment, as often with python, through python-virtualenv
or conda
for instance.
There are two ways you can install it:
You can also fetch the latest release from PyPi. This will not contain the wheels for the sparse attention kernels, for which you will need to build from source.
conda create --name xformer_env
conda activate xformer_env
pip install xformers
These commands will fetch the latest version of the code, create a dedicated conda
environment, activate it then install xFormers from source. If you want to build the sparse attention CUDA kernels, please make sure that the next point is covered prior to running these instructions.
git clone [email protected]:facebookresearch/xformers.git
conda create --name xformer_env python=3.8
conda activate xformer_env
cd xformers
pip install -r requirements.txt
pip install -e .
Installing the CUDA-based sparse attention kernels may require extra care, as this mobilizes the CUDA toolchain. As a reminder, these kernels are built when you run pip install -e .
and the CUDA buildchain is available (NVCC compiler). Re-building can for instance be done via python3 setup.py clean && python3 setup.py develop
, so similarly wipe the build
folder and redo a pip install -e.
Some advices related to building these CUDA-specific components, tentatively adressing common pitfalls. Please make sure that:
- NVCC and the current CUDA runtime match. Depending on your setup, you may be able to change the CUDA runtime with
module unload cuda module load cuda/xx.x
, possibly alsonvcc
- the version of GCC that you're using matches the current NVCC capabilities
- the
TORCH_CUDA_ARCH_LIST
env variable is set to the architures that you want to support. A suggested setup (slow to build but comprehensive) isexport TORCH_CUDA_ARCH_LIST="6.0;6.1;6.2;7.0;7.2;8.0;8.6"
Some parts of xFormers use Triton, and will only expose themselves if Triton is installed, and a compatible GPU is present (nVidia GPU with tensor cores). If Triton was not installed as part of the testing procedure, you can install it directly by running pip install triton
. You can optionally test that the installation is successful by running one of the Triton-related benchmarks, for instance python3 xformers/benchmarks/benchmark_triton_softmax.py
Triton will cache the compiled kernels to /tmp/triton
by default. If this becomes an issue, this path can be specified through the TRITON_CACHE_DIR
environment variable.
This will run a benchmark of the attention mechanisms exposed by xFormers, and generate a runtime and memory plot.
If this concludes without errors, the installation is successful. This step is optional, and you will need some extra dependencies for it to
be able to go through : pip install -r requirements-benchmark.txt
.
Once this is done, you can run this particular benchmark as follows:
python3 xformers/benchmarks/benchmark_encoder.py --activations relu --plot -emb 256 -bs 32 -heads 16
Let's start from a classical overview of the Transformer architecture (illustration from Lin et al,, "A Survey of Transformers")
You'll find the key repository boundaries in this illustration: a Transformer is generally made of a collection of attention mechanisms, embeddings to encode some positional information, feed-forward blocks and a residual path (typically referred to as pre- or post- layer norm). These boundaries do not work for all models, but we found in practice that given some accomodations it could capture most of the state of the art.
Models are thus not implemented in monolithic files, which are typically complicated to handle and modify. Most of the concepts present in the above illustration correspond to an abstraction level, and when variants are present for a given sub-block it should always be possible to select any of them. You can focus on a given encapsulation level and modify it as needed.
├── components # Parts zoo, any of which can be used directly
│ ├── attention
│ │ └ ... # all the supported attentions
│ ├── feedforward #
│ │ └ ... # all the supported feedforwards
│ ├── positional_embedding #
│ │ └ ... # all the supported positional embeddings
│ ├── activations.py #
│ └── multi_head_dispatch.py # (optional) multihead wrap
├── factory
│ ├── block_factory.py # (optional) helper to programatically generate layers
│ └── model_factory.py # (optional) helper to programatically generate models
├── models
... # Full models, ready to be used
Attention mechanisms
-
- whenever a sparse enough mask is passed
-
- courtesy of Triton
-
Local. Notably used in (and many others)
-
- See BigBird, Longformers,..
-
- See BigBird, Longformers,..
-
... add a new one see Contribution.md
- Many attention mechanisms, interchangeables
- Optimized building blocks, beyond PyTorch primitives
- sparse attention
- block-sparse attention
- fused softmax
- fused linear layer
- fused layer norm
- Benchmarking and testing tools
- micro benchnmarks
- transformer block benchmark
- LRA, with SLURM suppot
- Programatic and sweep friendly layer and model construction
- Hackable
- Not using monolithic CUDA kernels, composable building blocks
- Using Triton for some optimized parts, explicit, pythonic and user-accessible
We've tried to collect a relatively exhaustive list of explanations in the HOWTO
xFormers has a BSD-style license, as found in the LICENSE file.
If you use xFormers in your publication, please cite it by using the following BibTeX entry.
@Misc{xFormers2021,
author = {Benjamin Lefaudeux, Francisco Massa, Diana Liskovich, Wenhan Xiong, Vittorio Caggiano, Sean Naren, Min Xu, Jieru Hu, Marta Tintore, Susan Zhang},
title = {xFormers: A modular and hackable Transformer modelling library},
howpublished = {\url{https://github.com/facebookresearch/xformers}},
year = {2021}
}
The following repositories are used in xFormers, either in close to original form or as an inspiration: