gobee - A Go XBee Library

gobee, Golang a library for enabling support of XBee series 2 and series 3 low power radios to your Go project.

---

Usage

Implement the XBeeTransmitter and XBeeReceiver interfaces, instantiate an XBee, and start communicating, almost... It is up to the gobee user to configure and own the serial port the XBee is connected to and marshal data to/from it.

XBeeTransmitter

gobee uses the XBeeTransmitter interface to request a byte slice be sent to the serial communications port the XBee is connected to.

type XBeeTransmitter interface {
	Transmit([]byte) (int, error)
}

XBeeReceiver

gobee uses the XBeeReceiver interface to report received API frames.

type XBeeReceiver interface {
	Receive(rx.RxFrame) error
}

XBee

This is the XBee widget used to communicate with the physical XBee.

transmitter := &Transmitter{...}	// your XBeeTransmitter
receiver    := &Receiver{...}		// your XBeeReceiver
xbee        := gobee.New(transmitter, receiver)

Building and Transmitting an API Frame

To send an API frame, construct the frame using an appropriate constructor and option functions to set frame parameters and then transmit the frame.

// build the frame
frame := tx.NewZB(
			tx.FrameID(frameID),
			tx.Addr64(api.BroadcastAddr64),
			tx.Addr16(api.BroadcastAddr16),
			tx.Data([]byte("Hello World!")))
			
// transmit the frame
_, err := xbee.TX(frame)
if err != nil {
	// handle transmit error
}

gobee will call the supplied Transmitters Transmit function to send a fully formed API Frame to the UART the XBee is connected to.

Sending API Frame to the UART

When a frame is transmitted, gobee forms an appropriate API frame (see Building and Transmitting an API Frame) and sends it to your XBeeTransmitter for writing to the serial UART the XBee is connected to.

func (tx *Transmitter) Transmit(buffer []byte) (n int, err error) {
	i, err := port.Write(buffer)
	if err != nil {
		fmt.Printf("Failed to write buffer to xbee comms: %v\n", err)
	}

	return i, err
}

Receiving Data from the UART

When data is received from the serial UART the XBee is connected to, send it to gobee.

n, err := port.Read(buffer)
if err != nil {
	// handle receive error
}

for i := 0; i < n; i++ {
	err = xbee.RX(buffer[i])
}

Receiving Data Frames from gobee

Your implemented XBeeReceiver will get called when completed API frames are received. gobee validates the received API frame and reports the data frame via the XBeeReceiver interface.

func (r *Receiver) Receive(f rx.Frame) error {
	switch f.(type) {
	case *rx.ZB:
		// do something with received ZB frame
	}

	return nil
}

License

gobee is licensed under the MIT License. See the LICENSE for more information.