forked from sq5bpf/k5prog
-
Notifications
You must be signed in to change notification settings - Fork 2
Quansheng UV-K5 EEPROM programmer
License
piotr022/k5prog
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
k5prog - Quansheng UV-K5 EEPROM programmer v0.1 (c) 2023 Jacek Lipkowski <[email protected]> This program can read and write the eeprom of Quansheng UV-K5. It can read/write arbitrary data, and might be useful for making backups of the configuration, mass programming of radios or reverse engineering of the radio configuration. Please note that it is probably possible to break your radio by writing a bad configuration to it, so please use at your own risk. Note that this program does not edit the contents of the eeprom. Use an external hex editor. The program is written to (hopefully) run on POSIX systems. Testing was done on GNU/Linux, but MacOS X and windows under cygwin should work too. For licensing see the file LICENSE. ---- Usage ---- For a basic usage use -r to read eeprom, -w to write eeprom. The -v option gives more verbosity. Read configuration: sq5bpf@chronos:~/k5prog$ ./k5prog -r -v Quansheng UV-K5 EEPROM programmer v0.2 (c) 2023 Jacek Lipkowski <[email protected]> k5_prepare: try 0 ****** Connected to firmware version: [k5_2.01.23] Sucessfuly read eeprom The eeprom contents are written to the file k5_eeprom.raw, this can be changed with the -f option. Write configuration from file k5_eeprom.raw: sq5bpf@chronos:~/chirp/k5prog$ ./k5prog -w -v Quansheng UV-K5 EEPROM programmer v0.2 (c) 2023 Jacek Lipkowski <[email protected]> k5_prepare: try 0 ****** Connected to firmware version: [k5_2.01.23] Read file k5_eeprom.raw success Sucessfuly wrote eeprom The -w option writes only the memory blocks which are written by the original radio software, in the same order. The -W option is a bit more brave, it writes all memory upto 0x1d00. I _think_ that the radio has calibration data above this address, but of course this is not certain, because this knowledge is a result of reverse engineering, and not information from the manufacturer. The -B option is the "brick my radio" mode. It writes all memory, possibly allowing overwriting of calibration data (if there is any) or other data which may be critical to the proper functioning of your radio. I have used this on my radio, and it still works but please be extra-careful. Other configuration options are: Quansheng UV-K5 EEPROM programmer v0.2 (c) 2023 Jacek Lipkowski <[email protected]> cmdline opts: -f <file> filename that contains the eeprom dump (default: k5_eeprom.raw) -r read eeprom -w write eeprom like the original software does -W write most of the eeprom (but without what i think is calibration data) -B write ALL of the eeprom (the "brick my radio" mode) -p <port> device name (default: /dev/ttyUSB0) -s <speed> serial speed (default: 38400, the UV-K5 doesn't accept any other speed) -h print this help -v be verbose, use multiple times for more verbosity ---- Compiling ---- This software was tested to compile using gcc on GNU/Linux systems, using a simple makefile: sq5bpf@dellix:~/k5prog-0.1$ make gcc -O2 k5prog.c -o k5prog Other POSIX platforms should work also, including MacOS X. The software compiles under Cygwin/Microsoft Windows, but has not been tested. According to the cygwin documentation you should use /dev/comX to use port comX (for example using com6: k5prog.exe -v -r -p /dev/com6) If port this to another platform, or do anything interesting with this software, tell me about it. ---- Other uses ---- The file uvk5_original_eeprom.raw contains an eeprom downloaded from a UV-K5 radio. Maybe it can be used to resurrect another radio of the same type if it was broken (perhaps by the use of this software :). ---- Protocol ---- The programming protocol used by this software has been reverse engineered by observing communications between the radio and the original programming software. It is not a variation of the typical Baofeng-like protocol. The format of the datagram sent to the radio is: 0xAB 0xCD len 0x00 <data bytes> <2 bytes CRC> 0xDC 0xBA The length is the length od the data bytes. The data is protected by a typical CRC-16 xmodem algorithm. The data bytes and the CRC are obfuscated by xor-in it with an 8-byte sequence. Fortunately the eeprom data contains a lot of 0xFF and 0x00 bytes, so the XOR sequence is easy to find by observing the traffic. The datagram sent from the radio is the same, but the CRC field is set to 0xFFFF. This shows that the CRC is not for data integrity, but for further obfuscation (same as the XOR). I intend to publish a further description of the protocol, and the eeprom contents, meanwhile the sources can be used as documentation. VY 73 Jacek / SQ5BPF
About
Quansheng UV-K5 EEPROM programmer
Resources
License
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published
Languages
- C 99.6%
- Makefile 0.4%