The automatic manager for booting Linux on (U)EFI.
Kernelstub is a utility to automatically manage your OS's EFI System Partition (ESP). It makes it simple to copy the current kernel and initramfs image onto the ESP so that they are automatically probable by most EFI boot loaders as well as the EFI firmware itself. It can also set up the system's NVRAM to add entries to the firmware boot menu for the kernel (and keep these options up to date when new kernel versions are installed).
Installation can be handled through the supplied Debian packaging as well as the
python packaging. If kernelstub is packaged in your distro's repositories, you
can install kernelstub through the kernelstub
package.
To build a debian package locally, first install the build dependencies. On Pop!_OS, you can install the build dependencies using this command:
sudo apt build-dep kernelstub
Otherwise, you will need to install the following packages:
python3-all
pyflakes3
debhelper (>= 7.4.3)
dh-python
Then use these commands to build the package:
git clone https://github.com/pop-os/kernelstub
cd kernelstub
dpkg-buildpackage -b -us -uc
sudo dpkg -i ../kernelstub*.deb
For installation on non-debian systems, or if you prefer to use Python packaging, use:
git clone https://github.com/pop-os/kernelstub
cd kernelstub
sudo python3 setup.py install --record=installed_files.txt
For your convenience, this will create a list of all files installed on the
system in the installed_files.txt
file, so that you can easily remove the
package later.
Usage is fairly straightforward and usually only requires running the command as
root with su
/sudo
. If your computer requires special kernel parameters to
boot, you can specify them as such:
sudo kernelstub -o "options_go here wrapped in-quotes"
Running the command with -o
will save the options used into the user section
of the configuration file (see Configuration below) so that you don't need to
specify them manually each time you run it.
Kernelstub assumes the quiet splash
options by default, since these generally
work on every system, at least for booting up to a usable system.
You can get output of the program using the -v
/--verbose
option. There are
three levels of verbosity. The default is to only show Warning
, Error
, and
Critical
failure messages. With one -v
, kernelstub will display information
about its progress to the command line. Two -v
flags will also display
debugging information generally only useful to developers.
By default, kernelstub will attempt to set up an entry in the system NVRAM to
boot the kernel directly. If you want to use kernelstub with a separate program
(e.g. bootctl
/systemd-boot
or rEFIt/rEFInd), you can use the -m
flag. This
causes kernelstub to copy the kernel and initrd into the ESP, but not set up any
NVRAM entries. The -l
option also explicitly sets up the configuration for
system-boot
or gummiboot
. These options are also stored in the config file.
There are other options as well, as detailed below:
Option | Action |
---|---|
-h , --help |
Display the help Text |
-c , --dry-run |
Don't actually copy any files or set anything up. |
-p , --print-config |
Print the current configuration and exit. |
Path Options | |
-r <path> , --root-path <path> |
Manually specify the root filesystem path. |
-e <path> , --esp-path <path> |
Manually specify the ESP path.* |
-k <path> , --kernel-path <path> |
Manually specify the path to the kernel image. |
-i <path> , --initrd-path <path> |
Manually specify the path to the initrd image. |
Kernel Parameters | |
-o <options> ,--options <options> |
Set kernel boot options.* |
-a <options> ,`--add-options |
Adds new options to the list of kernel boot options.*⁺ |
-d <options> ,`--delete-options |
Remove options from the list of kernel boot options.*⁺ |
Output/logging Options | |
-v , --verbose |
Display more information to the command line |
-g <log> ,--log-file <log> |
Where to save the log file. |
Behavior Options | |
-l , --loader |
Create a systemd-boot -compatible loader config.* |
-n , --no-loader |
Turns off creating the loader configuration. |
-s , --stub |
Set up NVRAM entries for the copied kernel. |
-m , --manage-only |
Don't set up any NVRAM entries.* |
-f , --force-update |
Forcefully update the main loader.conf.** |
*These options save information to the config file.
**This may overwrite another OS's information.
⁺Does not add options if they are already present in the configuration, or remove options if they are not present. Each option is checked individually.
Kernelstub has a robust configuration system with multiple fallbacks for safety.
By default, a sample (non-functional) configuration file is provided in
/etc/kernelstub/SAMPLE
which demonstrates the available options and
the JSON syntax. The main configuration file is stored in
/etc/kernelstub/configuration
, which is created by default if it doesn't exist.
Kernelstub also has a copy of the default configuration stored internally, so
that it can create a config file if none already exists.
When kernelstub is run with the -o
, -l
, -s
, or -m
options, this is
recorded in the config file so that future automatic runs or runs without
options will work correctly. Options specified on the command line always take
precedence over options in the config files.
Your distribution or package maintainer may additionally create a configuration
template in /etc/default/kernelstub
. This should not be edited except by
maintaners. Use the standard config file instead, as this will be loaded instead
of the distributor file if it exists, and options will never be saved to the
distributor file.
If kernelstub is going to be used in a scripted environment, it is useful to know what return codes it provides in the event of errors. The table below details these codes and their meaning:
Exit Code | Meaning |
---|---|
0 | Success |
166 | The kernel path supplied/detected was invalid |
167 | The initrd path supplied/detected was invalid |
168 | No kernel options found/supplied |
169 | Malformed configuration found |
170 | Couldn't copy kernel image to ESP |
171 | Couldn't copy initrd image to ESP |
172 | Couldn't create a new NVRAM entry |
173 | Couldn't remove an old NVRAM entry |
174 | Couldn't detect the block device file for the root partition |
175 | Coundn't detect the block device file for the ESP |
176 | Wasn't run as root |
177 | Couldn't get a required UUID |
Kernelstub is available under an COLPL + ISC-based license. The full license is supplied in the LICENSE.txt file.
Copyright 2017-2018 Ian Santopietro [email protected]
Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.