Skip to content

Triple USB-to-serial adapter firmware for flashing onto an STM32F103C8T6 "blue pill" minimum development board ⛺

License

Notifications You must be signed in to change notification settings

satoshinm/pill_serial

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

55 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

pill_serial: USB-to-serial x 3

CircleCI

Triple USB-to-serial adapter firmware for flashing onto an STM32F103C8T6 "blue pill" minimum development board

Run make to build, then flash the src/pill_serial.bin file to a blue pill over the PA9/PA10 serial port with BOOT0=1. Then plug in the blue pill into your PC using USB, and three virtual (ACM CDC, "/dev/usbmodem") serial ports should appear. These correspond to the three USART ports available on the board, in order:

TX pin RX pin
PB10 PB11
PA2 PA3
PA9 PA10

This code is heavily based on the Black Magic Debug Probe firmware. Note if you only need one serial port, you may be better off using the Black Magic Probe, since it also provides a JTAG/SWD probe, whereas pill_serial only provides serial ports.

See also associated blog post: Triple USB-to-serial adapter using STM32 blue pill


Comments?

About

Triple USB-to-serial adapter firmware for flashing onto an STM32F103C8T6 "blue pill" minimum development board ⛺

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published