Sunton ESP32-2432S028R Case

This is a case for the ESP32 based Sunton ESP32-2432S028R LCD+Controller

This is a remix of the really nice case by @Dsk001. The original can be found here Alien3D Deck

This remix has changed the following

• Changed to using inset M3x12 socket head screws
• Removed logo(s) (I needed a cleaner look)
• Cleaned up LED hole on the back plate
• Created two models, one with backplate mounting track and one without the track

This case is suitable for ESP32-2432S028R which can easily be found on amazon, ebay or aliexpress. Below are some pictures to help you identify it.

Specifications

• 2.8" ESP32 Module ESP32-2432S028R
• WiFi+BT Dual-core
• 240X320 Resistive LCD Touchscreen

Requires four M3x12 socket head screws. These can easily be found on amazon or aliexpress and look like this:

I printed using these settings:

• PLA
• 0.4mm nozzle
• adaptive layer height (using the default adaptive layer bambu studio settings)
• 2 layer wall
• no support
• 10% infill
• gyroid infill pattern
• no brim
• no supports
• no ironing

Requires 24g of filament

Print orientation:

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.