verup and ...

- firmware: Unicam: Request frequency of 250MHz when running camera use cases

- firmware: arm_loader: Fix UART unmapping

- firmware: uart1: Revert to the old core-frequency-locking method
  See: #1267

- firmware: arm_loader: Provide a sensible device_tree_end default
  See: #1259

- firmware: mmal_ril: Fix size reported on ENOSPC error
  See: #1269

- firmware: hvs: Trigger the EOLn timer at the field rate when interlaced
  See: #1227

- firmware: bootloader_state: Add support for a custom TFTP prefix parameter

- firmware: arm_loader: GIC stub => 2711 stu
- See: #1255

- firmware: arm_loader: Add os_prefix option
  See: raspberrypi/linux#3237

- firmware: Add support for arbitrary memory specification

- firmware: arm_loader: Fix explicit kernel name handling
  See: #1277

- firmware: Added a new display power mailbox call

- firmware: Update display_power gencmd with optional display id
  See: raspberrypi/linux#3050

- firmware: Remove legacy pkgconfig to avoid Mesa conflicts
  See: raspberrypi/userland#585

- firmware: Update display_power gencmd with optional display id

- firmware: sysman: Fix unsafe check for h264 being enabled
  See: popcornmix/omxplayer#749

- firmware: platform: Reduce absolute microvolts threshold to 500000

- firmware: tv_server: Also initialise ts queue on composite
  See: https://forum.kodi.tv/showthread.php?tid=348205

- firmware: Loop to init hotplug

- firmware: hdmi: Change HDMI state machine and BVB clocks as turbo clocks

- firmware: hdmi: Add EOF timeout to unjam failed mode changes

- firmware: platform: Differentiate between boostable and turbo clocks

- firmware: arm_dt: Set WL_ON and BT_ON from .dtb

- firmware: Fixup chosing of bit depth in legacy graphics
  See: raspberrypi/linux#3331

- firmware: vec: Setup WideScreen Signalling outside of copy protection
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=256489

- firmware: Add global reset mailbox

- firmware: 2711: De-couple start.elf clock setup from the bootloader

- firmware: scaler: Correct defines for SCALER_POS0_START_Y_[MASK|SHIFT] (HVS4)

- firmware: platform: Fix missing HDMI PHY power down bit

- firmware: Reduce voltage as part of DVFS

- firmware: arm-loader: Inherit 2711 mac-address from the bootloader
  See: http://git/vc4/vc4/merge_requests/687

- firmware: arm_loader: Respect all required frequencies when throttling

- firmware: Fixup vcgencmd display_power return values

- firmware: platform: Allow fixed voltage with avs_disable=1

- firmware: EMMC: Use PLLD for EMMC for 250MHz host-clock
  See: #1289

- firmware: platform: Round down effective frequencies when they exceed max
  See: #1290

- firmware: arm_loader: Pass video mode via kernel command for composite
  See: #1285

- firmware: Fix lens shading table generation buglet
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=190586&start=75#p1534672

- firmware: hdmi: Use RB2 timing for 2560x1440@60 if pixel clock is 241.5 MHz

- firmware: arm_dt: Look for ethernet0 before ethernet

- firmware: arm_dt: Set PCIe dma-ranges from memory size

- firmware: hdmi: HDMI SM clock must not run slower than audio MAI clock
  See: #1295

- firmware: arm_loader: Pass video mode via kernel command for composite (master)
  See: #1285

- firmware: power: Use Pi4 PMIC values on Pi3+

- firmware: Fix filtered handling of array variables
  See: #1296

- firmware: Update libfdt to v1.5.1+
  See: raspberrypi/userland#582

- firmware: dtoverlay: Extend DT parameter syntax

- firmware: memorymap: Include FW revision in start.elf

- firmware: Fixup for vcgencmd display_power
  See: #1224

- firmware: Add hdmi_wifi_pixel_freq_adj config option

- firmware: Revert mmal: Support 64 bit clients
  See: raspberrypi/userland#586

- firmware: arm_dt/dtoverlay fixes for ARM side camera driver power control

- firmware: arm_ldconfig: Support multiple initramfs files
  See: #1318

- firmware: Add support for backlight enable

- firmware: master: arm_ldconfig: Support multiple initramfs files
  See: #1318

- firmware: power: Make pmicrd/pmicwr available to all

- firmware: platform: Only throttle down from arm_freq

- firmware: platform: Bump desired ring osc to 3.7 on Pi3/CM3

- firmware: arm_loader: Add 2ms delay before resetting SD_IO

- firmware: isp/tuner: Resetting to a lamp mode cancels manual_gains_used_

- firmware: board_info: Fix uninitialised phy_addr handling in network boot

- firmware: IL video_decode: Default to H264 as MPEG4 isn't supported

- firmware: IL egl_render: Fail the create on Pi4

- firmware: arm_dispmanx: Column pitch for YUV10COL is in lines not bytes

- firmware: platform: 2711: Also add chicken bits to dvfs voltage

- firmware: MMAL / video_render: Allow column stride to be set on column formats

- firmware: vc_image/video_decode: Move +16 lines for di_adv from vc_image to decoder

- firmware: platform: 2711: Support overclocking gpu frequencies
  See: #1290

- firmware: gencmd: Fix measure_clock name for CLOCK_OUTPUT_108

- firmware: mmal isp: Remote alignment requirements for RGB24 formats

- firmware: Add missing flags for VC_IMAGE_PROP_YUVUV_4K_CHROMA_ALIGN

- firmware: platform: Compromise on gpu overclock settings
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=262649&start=100#p1610362

- firmware: Add the ability to export labels from overlays

- firmware: loader: 4-byte align initramfs blocks
  See: #1318

- firmware: vd3/video_decode: Do not add 16 lines of context when video is 1920 tall
  See: #1334

- firmware: Allow use of 24 bit framebuffers
  See: #1338

- firmware: arm_loader: Add non-os_prefix cmdline.txt fallback

- firmware: board_info: Set board-info memory size according to SDRAM mode registers

- firmware: arm_loader: Treat min frequencies as optional
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=264786

- firmware: arm_loader: Add overvoltage_delta for manufacture tests

- firmware: Support Isp stats and params

- firmware: arm_loader: Make EMMC2 dma-ranges patch more tolerant

- firmware: bootromfs: Delete unwanted assert

- firmware: usb_eth: Increase timeouts for TFTP requests and retransmit ACK

- firmware: isp component: rtos_common_mem: Fix handle acquire usage with wrap handles

- firmware: il: video_render: Require 4k chroma alignment on YUVUV transpose
  See: #1334

- firmware: vc_image: Don't align the YUVUV pitch to SDRAM pages if not aligning to 4k
  See: raspberrypi/linux#3492

- firmware: isp component: rtos_common_mem: Fix smallalloc test in mem_handle_acquire_if_valid

- firmware: platform: 2711: Make chicken-bit pip size vary with pmic quantum

- firmware: USB device boot for CM4

- firmware: arm_loader: Add SET_LAUNCH_VPU1 mailbox message

- firmware: il: camera: Add config.txt param awb_auto_is_greyworld for NoIR camera
  See: #1167

- firmware: arm_loader: Provisional support for high peris

- firmware: arm_loader: Only add margins to cmdline if non-zero

- firmware: clock: Support clock_measure_pll on pi0-3

- firmware: platform: Back to CLOCK_PLL_CHAN_CPER for emmc on pi0-3

-  firmware: gpu_server: Fixup after LAUNCH_VPU1 commit

- firmware: power: Add a notch to compensate for trim on 2835

- firmware: isp/tuner: Resetting to a lamp mode cancels manual_gains_used_ (master)

- firmware: armstubs: Rebuild with latest source

- firmware: arm_loader: Avoid resetting the GPIO expander

- firmware: vcos_genversion: Fix up legacy variant names

- firmware: dtoverlay: Add overlay_map functionality
  See: raspberrypi/linux#3520

-  firmware: isp_tuner: Add in the slave AWB tuner handling

- firmware: arm_dt: Apply os_prefix to device_tree= files

- firmware: clock_2711: Fix PLL analog setup

- firmware: board_info: Also include CM3+ for pmic trait
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=267576&start=25#p1643032

- firmware: Switch to building from common firmware branch

- firmware: isp: make AGC metering respect the (digital zoom) crop region

- firmware: Avoid linking in khronos on Pi4

- firmware: clock: Reset PLLC after switching VPU to OSC

- firmware: arm_loader: Make 4GB available if arm_peri_high

- firmware: arm_loader: Complete arm_peri_high support
  See: #1374

- firmware: board_info: Split Model B into rev1 and rev2
  See: raspberrypi/linux#3537

- firmware: power: Clamp voltage to platform limits for all power supplies

- firmware: isp: Ensure lens shading (LS) is enabled when a valid LS table is received

- firmware: otp: Fix advanced boot row definition

- firmware: bootcode: Fix issue booting with webcams

- firmware: isp: fix ISP component to return non-zero focus FoMs

- firmware: Fix for IMX477 focal length, f_number and aperture

- firmware: Update firmware for USB MSD boot

- firmware: platform: Fix overflow on high arm overclocks

- firmware: video_encode: Add option to include header bytes with frame

- firmware: DSI display: Close I2C handle if the display doesn't probe

- firmware: mmal/vc: Add mapping for OMX_IndexConfigBufferStall / MMAL_PARAMETER_VIDEO_STALL_THRESHOLD
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=70&t=273123&p=1655481

- firmware: hdmi: Request an I2C interrupt for EDID reading

- firmware: i2c: Move using_interrupt flag into periph_setup

- firmware: camera: Latency reduction for captures

- firmware: IL camera fixes for reduced startup time

- firmware: mmal_ril: Correct a use of portdef.video to portdef.image

- firmware: vc_image: SDRAM page alignment is optional for YUV10_COL
  See: https://forum.libreelec.tv/thread/21985-noise-artefacts-when-playing-back-4k-hevc-video-on-rpi4-le-9-2-1-no-problems-on/

- firmware: imx477: Correct the logic for extending hblank on long exposures

- firmware: il: isp: Ensure HR output is active and ISP is open before starting a frame

- firmware: isp_ctrl: Fail in start_[raw|yuv]_frame if ISP is not idle
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=275489

- firmware: vcfw: Fix PMIC max voltage
  See: https://forum.libreelec.tv/thread/22097-libreelec-leia-9-2-3

- firmware: ISP raw14 and mono input, 16bpc YUV output. Camera subsystem not messing with GPIO0

- firmware: isp: fix assert from initial setting of ISP denoise parameters

- firmware: arm_ldconfig: Don't pad initramfs files
  See: #1395

- firmware: board_info: Add and use BT_FLOWCONTROL trait

- firmware: logging: Add missing checks for uart_output_enabled

- firmware: host_applications: Install debug_sym.h

- firmware: logging: Inherit uart_2ndstage config from the bootloader

- firmware: Fix Pi4 regression in previous build

- firmware: platform: Resolve BT flow control contention
  See: Hexxeh/rpi-firmware#227

- firmware: hdmi: Limit the valid CEA modes to those defined in the table
  See: https://forum.libreelec.tv/thread/22135-regression-raspberry-pi-3-hdmi-output-broken-after-upgrade-to-9-2-x

- firmware: imx477: Add switch to allow switching of on-sensor DPC

- firmware: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET
  See: https://forum.kodi.tv/showthread.php?tid=354589

- firmware: arm_ldconfig: Honour the kernel8 text offset
  See: #1415

- firmware: jpeghw: Skip repeated 0xFF padding bytes between markers
  See: RPi-Distro/vlc#8

- firmware: arm_loader: Allow interlaced HDMI modes from FKMS
  See: raspberrypi/linux#3698

- firmware: arm_loader: Limit rather than reject boosts with disable_auto_turbo

- firmware: i2c: Clearing the TA bit may time out
  See: #1422

- firmware: arm_loader: Add an accelerated memmove

- firmware: arm_loader: memmove kernel to preferred text_offset
  See: #1421

- firmware: filesystem: Fix GPT regression on USB after SD fix
  See: #1420

- firmware: arm_loader: Don't enable the ARM USB IRQ
  See: raspberrypi/linux#3703

- firmware: hdmi: Remove M2MC/BVB min turbo clock request

- firmware: IL: camera: Fix stereoscopic pool allocations

- firmware: arm_loader: Add support for double clock/pixel_rep for FKMS
  See: raspberrypi/linux#3725

- firmware: scalerlib: Set the default chroma location for YUV10 to match 8bit

- firmware: scalerlib: Set chroma_vrep correctly for YUV10COL

- firmware: isp: check the hi-res resize filter mode when the input crop changes

- firmware: arm_loader: Knock 1.7 seconds off boot time
  See: #1375

- firmware: Imx477 external sync signals

- firmware: bootloader: Some tweaks for LED, UART, USB timeouts

- firmware: platform: Avoid vco issue with low arm_freq_min on Pi0-3
  See: #1431

- firmware: arm_loader: Don't try to load to 0 a.k.a. NULL
  See: #1445

- firmware: armstub7: Configure the top 32 STB interrupts

- firmware: dispmanx: Remove elements cleanly that are totally offscreen negatively
  See: raspberrypi/linux#3735

- firmware: hdmi: Set the altered mode, not the caller's mode
  See: #1446

- firmware: dt-blob: Declare CM4 GPIO expander pins

- firmware: clocks: Make frequency_t 64-bit

- firmware: Revert frequency_t: Make 64-bit

- firmware: ISP/tuner: Increase max exposure time for fixed ISO modes on IMX219 and 477
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=281603

- firmware: sdhost_arasan: Ignore DCRC after CMD12
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=282928

- firmware: firmware: frequency_t: Make 64-bit

- firmware: pi4: allow pllb changes while running
  See: #1431

- firmware: board_info: Give the CUSTOM boards the PMIC_NCP6343 trait

- firmware: dispmanx/displays: Allow both DPI and DSI displays simultaneously

- firmware: imx477: Release the I2C semaphore once finished, not before

- firmware: clock: Allow overclocking pllb
  See: raspberrypi/linux#3823

- firmware: hdmi/edid: Reduce the bias to all but the first detailed timing

- firmware: hdmi/edid: Add option to ignore any odd horizontal timings on Pi4

- firmware: sdcard: Hybrid MBR - only select GPT if it is the first primary partition
  See: #1465

- firmware: audioplus: Avoid broken audio when requesting hdmi audio device when using composite display
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=283639

- firmware: platform: Add support for SCB clock and set to 250MHz

- firmware: Revert arm_loader: Move first call to set_turbo after arm->start

- firmware: arm_ldconfig: GZIP-compressed ARMv8 kernel support

- firmware: arm_ldconfig: Restore the fallback load address
  See: #1467

- firmware: ilcamera: Disable timeouts on trigger sink devices

- firmware: genet: Flush RBUF/TBUF and clear mac-address on stop
  See: raspberrypi/linux#3850

- firmware: dmalib: Add support for 40-bit 2d memcpy

- firmware: sdcard: Reduce SD read overhead

- firmware: sdhost_arasan: Increase time threshold before suspend

- firmware: video_decode: Only shutdown codec on both ports being disabled

- firmware: vc_image_helper: Avoid misaligned exception due to uninitialised pointer

- firmware: arm_loader: Make arm clock accesses only see their own boosts
  See: #1469

- firmware: arm_loader: enable simple_fb iff there is a display
  See: raspberrypi/linux#3878

- firmware: arm_loader: Mark V3D early boost as for the ARM
  See: #1469

- firmware: arm_loader: Update armstubs with those from PR 117
  See: raspberrypi/tools#117

- firmware: Revert sdcard: Reduce SD read overhead

- firmware: arm_loader: Add GET/SET_VPU_VECTOR mailbox calls

- firmware: arm_ldconfig: Don't invalidate the dcache for most of memory
  See: #1445

- firmware: arm_loader: Allow arm to see force_turbo and uart boosts

- firmware: hdmi: Timeout HDMI EDID reads

- firmware: pwm_sdm: move modulator to VPU0
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=195178&p=1723639

- firmware: Add tryboot mechanism to provide a fallback if an OS upgrade fails

- firmware: camplus: stills_denoise: Release the VRF between iterations

- firmware: vc_image: Further fixup of fix_alignment
  See: #1334

- firmware: arm_loader: Support large PCIe window with <8GB RAM
  See: https://www.raspberrypi.org/forums/viewtopic.php?p=1759627#p1759627

- firmware: filesys: Close the brfs from filesys_power(..., 0)

- firmware: platform: Avoid vco issue with low arm_freq_min on Pi0-3
  See: #1431

- firmware: video_encode: Allow level 5.0 and 5.1
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=291447

- firmware: xhci: Don't reset BCM2711 XHCI from filesys in start.elf

- firmware: bootcode.bin: Add support for tryboot

- firmware: Switch DA9121 PMIC to PWM mode when ARM > 600 MHz

- firmware: arm_dt: Handle parent interrupt controllers when masking

- firmware: config: Add cm4 and pi400 config section filters

- firmware: MMAL/IL/ISP component: Set the ISP boost frequency once on open

- firmware: sdcard: Remove legacy NOOBS support to support booting from primary partition 4

- firmware: arm_loader: Move 2711 RAM to PCIe address 16GB

- firmware: video_decode: Add parameter to disable timestamp validation

- firmware: Imx477 camera tuning fixes
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=291032#p1770287
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=291032&start=25#p1771066

- firmware: Use DMA40 for PWM audio

- firmware: imx477: Replace existing 720p120 mode with a new 1332x990 120fps mode

- firmware: arm_loader: Allow max_framebuffers=0 to disable framebuffers
  See: #1507

- firmware: dmalib: Allow sdcard to borrow channel 6
  See: #1511
  See: Hexxeh/rpi-firmware#251
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=294932

- firmware: DSI interrupt fixes, and HDMI SM clock for deep colour

- firmware: dmalib: Keep 40-bit DMA clear of L2 alias

- firmware: audioplus: Fix hang when switching destination
  See: #1516

- firmware: HAT/I2C updates

- firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 formats

- firmware: Revert firmware: HAT/I2C updates

- firmware: firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 formats

- Firmware: undo previous reverts

build/rpi/config_pkgver

@@ -1 +1 @@
-config_deb_version=9
+config_deb_version=9.5