Skip to content

yorugac/libnetwork-plugin

 
 

Repository files navigation

Build Status Circle CI Coverage Status

#Libnetwork plugin for Calico

This plugin for Docker networking (libnetwork) is intended for use with Project Calico. Calico can be deployed on Docker using guides from the calico-containers repository.

How to Run It

When deployed using calicoctl (see calico-docker) simply pass in the --libnetwork flag.

  • To run a specific version of the plugin use the --libnetwork-image flag.

With Docker

Prebuilt docker images are available on DockerHub with tags available for each libnetwork-plugin release.

The container needs to be run using docker run -d --privileged --net=host -v /run/docker/plugins:/run/docker/plugins calico/node-libnetwork

  • Privileged is required since the container creates network devices.
  • Host network is used since the network changes need to occur in the host namespace
  • The /run/docker/plugins volume is used to allow the plugin to communicate with Docker.

If you don't have etcd available at localhost:4001 then you need to pass in the location as an environment variable e.g. -e ETCD_AUTHORITY=1.2.3.4:2379

From source

To run the plugin from source use gunicorn e.g. sudo gunicorn -b unix:///run/docker/plugins/calico.sock libnetwork.driver_plugin:app

For the full list of recommended options for use in production, see start.sh

For testing out changes, add the --reload flag or use make run-plugin-local

Install the dependencies from requirements.txt using pip install -r requirements.txt

Calico networking and IPAM

The plugin provides Calico driver support for both networking, and IPAM. When creating a network in Docker, use the -d calico to use the Calico network driver, and the --ipam-driver calico to use the Calico IPAM driver.

Known limitations

The following is a list of known limitations when using the Calico libnetwork driver:

  • Creating a mix of containers which use both the Calico IPAM driver and the default IPAM driver is not recommended. In this case, isolation between containers on a "default IPAM" network may not be correctly isolated from containers on a "Calico IPAM" network running on the same host.
  • It is not possible to add multiple networks to a single container. However, once a container endpoint is created, it is possible to manually add additional Calico profiles to that endpoint (effectively adding the container into another network).
  • When using the Calico IPAM driver, it is not yet possible to select which IP Pool an IP is assigned from. Make sure all of your configured IP Pools have the same ipip and nat-outgoing settings.

Troubleshooting

Logging

Logs are sent to STDOUT. If using Docker these can be viewed with the docker logs command.

Changing the log level

This currently requires a rebuild. Change the following line towards the top of the plugin code

app.logger.setLevel(logging.DEBUG)

This uses the standard Python logging module, so logging level may be set to any of the values defined in the logging module.

Performance

Datastore Interactions

These don't include interactions from the Docker daemon or felix. These are interactions from the libnetwork-plugin only.

The number of reads and writes is dependent on whether Calico IPAM driver is also used.

Datastore interactions using default IPAM:

Operation Reads Writes Deletes Notes
DiscoverNew 0 0 0 None
CreateNetwork 0 4 (5 if IPv4 and IPv6) 0 2 for creating profile (tags and rules), 1 per IP Pool, and 1 to store the request JSON
CreateEndpoint 1 1 0 Read CreateNetwork JSON and write Endpoint
Join 1 0 0 Read CreateNetwork JSON
DiscoverDelete 0 0 0 None
DeleteNetwork 1 0 3 (4 if IPv4 and IPv6) Delete profile, pool and stored CreateNetwork JSON
DeleteEndpoint 0 0 1 Delete endpoint
Leave 0 0 0 None

Datastore interactions using Calico IPAM:

Operation Reads Writes Deletes Notes
DiscoverNew 0 0 0 None
RequestPool 0 0 or 1 0 1 for verifying Calico pool if subnet explicitly specified
CreateNetwork 0 3 0 2 for creating profile (tags and rules), and 1 to store the request JSON
RequestAddress >=2 >=1 >=0 May have multiple reads/writes/deletes depending on contention (see libcalico IPAM), Reads IP pools if subnet is specified on network.
CreateEndpoint 3 1 0 Read CreateNetwork JSON and IPv4/IPv6 next hops, and write Endpoint
Join 2 0 0 Read CreateNetwork JSON and Endpoint
DiscoverDelete 0 0 0 None
ReleasePool 0 0 0 None
DeleteNetwork 1 0 3 (4 if IPv4 and IPv6) Delete profile, pool and stored CreateNetwork JSON
ReleaseAddress >=1 >=1 >=0 May have multiple reads/writes/deletes depending on contention (see libcalico IPAM)
DeleteEndpoint 0 0 1 Delete endpoint
Leave 0 0 0 None

Contributing and getting help

See the main Calico documentation

Further sources of getting help are listed in the calico-docker repository. Analytics

About

Docker libnetwork plugin for Project Calico

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 89.7%
  • Makefile 9.9%
  • Shell 0.4%