Skip to content
This repository has been archived by the owner on May 26, 2024. It is now read-only.

107-systems/CAN-Power-Injector

Repository files navigation

CAN-Power-Injector

Spell Check status

The purpose of this board is to inject 5V DC power at up to 5A for powering CAN bus devices.

Blockdiagram

Electrical Parameters

Name Value
V_IN min 10.5 V
V_IN max 40.0 V
V_CAN_OUT 5.0 V to 5.5 V
I_CAN_OUT,CONTINUOUS 5.0 A

Inputs

Designator Name Connector
CN4 Battery (4S / 4100 mAh LiFePo) Powerpole® PP15 to PP45
CN1 Battery 3.5 mm screw terminal (not populated)

Outputs

Designator Name Connector
CN2 and CN3 CAN channel 1 JST GH 1.25mm 4-pin.
CN5 and CN6 CAN channel 2 JST GH 1.25mm 4-pin.
CN7 5V 5V output, internal for testing (not populated)

Enclosure

There exists a 3D printable enclosure to encapsulate the PCB.

Standard

Low profile

PCB

Top

Bottom

About

Provide power via CAN cabling to all connected CAN devices.

Resources

License

Stars

Watchers

Forks

Sponsor this project

 

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •  

Languages