-
Notifications
You must be signed in to change notification settings - Fork 138
MIPS pseudo instructions
In MIPS, some operations can be performed with help of other instructions. The most common operations are unified in pseudo-instructions — they can be coded in assembly language, and assembler will expand them to real instructions. The exact expansion is compiler-defined, but the result should be similar to ours:
Name | Assembly syntax | Expansion | Operation in C |
---|---|---|---|
move | move $t, $s |
or $t, $s, $zero |
t = s |
clear | clear $t |
or $t, $zero, $zero |
t = 0 |
load 16-bit immediate | li $t, C |
ori $t, $zero, C_lo |
t = C |
load 32-bit immediate | li $t, C |
lui $t, C_hi ori $t, $t, C_lo
|
t = C |
load label address | la $t, A |
lui $t, A_hi ori $t, $t, A_lo
|
t = A |
Name | Assembly syntax | Expansion |
---|---|---|
branch unconditionally | b C |
beq $zero, $zero, C |
branch unconditionally and link |
bal C |
bgezal $zero, C |
branch if greater than | bgt $s, $t, C |
slt $at, $t, $s bne $at, $zero, C
|
branch if less than | blt $s, $t, C |
slt $at, $s, $t bne $at, $zero, C
|
branch if greater than or equal |
bge $s, $t, C |
slt $at, $s, $t beq $at, $zero, C
|
branch if less than or equal |
ble $s, $t, C |
slt $at, $t, $s beq $at, $zero, C
|
branch if greater than unsigned |
bgtu $s, $t, C |
sltu $at, $t, $s bne $at, $zero, C
|
branch if zero | beqz $s, C |
beq $s, $zero, C |
branch if equal to immediate | beq $t, V, C |
ori $at, $zero, V beq $t, $at, C
|
branch if not equal to immediate | bne $t, V, C |
ori $at, $zero, V bne $t, $at, C
|
Name | Assembly syntax | Expansion |
---|---|---|
set if less or equal then | sle $s, $t1, $t2 |
bne %t1,$t2,confrontation ori $s, $0, 1 beq $0, $0, EXIT confrontation: slt $s, $t1,$t2
|
Name | Assembly syntax | Expansion | Operation in C |
---|---|---|---|
multiplicate and return 32 bits |
mul $d, $s, $t |
mult $s, $t mflo $d
|
d = (s * t) & 0xFFFFFFFF |
quotient | div $d, $s, $t |
div $s, $t mflo $d
|
d = s / t |
remainder | rem $d, $s, $t |
div $s, $t mfhi $d
|
d = s % t |
Name | Assembly syntax | Expansion | Operation in C |
---|---|---|---|
jump register and link to ra | jalr $s |
jalr $s, $ra |
ra = PC + 4; goto s; |
Name | Assembly syntax | Expansion | Operation in C |
---|---|---|---|
not | not $t, $s |
nor $t, $s, $zero |
t = ~s |
Name | Assembly syntax | Expansion | Operation in C |
---|---|---|---|
nop | nop |
sll $zero, $zero, 0 |
{} |
In fact, every MIPS instruction that has $zero
as its destination and doesn't touch memory, access I/O system, and/or call a trap, can be treated as a nop
; but using sll $zero, $zero, 0
is the most convenient because it's byte code is all-zeroes 0x00000000
.
Since 2014/2015, all instructions are printed as real MIPS instructions in MIPT-MIPS. Unexpanded pseudo-instructions are left only in testing traces source files (.s
files).
MIPT-V / MIPT-MIPS — Cycle-accurate pre-silicon simulation.