v0.2.5

Release 0.2.5

• html: fix syntax problem in iceServers (#77)
• debian: add Breaks/Conflicts/Replaces to overwrite old version of camera-streamer (#79)
• http: add --http-listen=<ip4>, and listen by default on 127.0.0.1 (#81) (breaking change)
• ffmpeg: remuxer: fix "initialization discards 'const' qualifier from pointer target type" (#80)

Variants

Download correct version for your platform:

• Variant: raspi: Raspberry PI compatible build with USB, CSI, WebRTC, RTSP support
• Variant: generic: All other platforms with USB and MJPEG support only for time being
• System: bullseye: Debian Bullseye (11) compatible build
• Platform: amd64: x86/64 compatible build
• Platform: arm32: ARM 32-bit kernel: PIs 0.2W, 2B, and higher, Orange PIs, Rock64, etc. No support for RPI0.
• Platform: arm64: ARM 64-bit kernel: PIs 0.2W, 3B, and higher, Orange PIs, Rock64, etc. No support for RPI0 and RPI2B.

Install on Raspberry PI or any other platform

Copy the below and paste into terminal:

if [[ -e /etc/default/raspberrypi-kernel ]]; then
  PACKAGE=camera-streamer-raspi_0.2.5.bullseye_$(dpkg --print-architecture).deb
else
  PACKAGE=camera-streamer-generic_0.2.5.bullseye_$(dpkg --print-architecture).deb
fi
wget "https://github.com/ayufan/camera-streamer/releases/download/v0.2.5/$PACKAGE"
sudo apt install "$PWD/$PACKAGE"

Enable one of provided systemd configuration:

ls -al /usr/share/camera-streamer/examples/
systemctl enable /usr/share/camera-streamer/examples/camera-streamer-raspi-v3-12MP.service
systemctl start camera-streamer-raspi-v3-12MP

You can also copy an existing service and fine tune it:

cp /usr/share/camera-streamer/examples/camera-streamer-raspi-v3-12MP.service /etc/systemd/system/camera-streamer.service
edit /etc/systemd/system/camera-streamer.service
systemctl enable camera-streamer
systemctl start camera-streamer

What's Changed

• html: fix syntax problem in iceServers by @dong-zeyu in #77
• Add Breaks/Conflicts/Replaces to debian control by @foosel in #79
• http: add --http-listen=<ip4>, and listen by default on 127.0.0.1 by @ayufan in #81
• ffmpeg: remuxer: fix "initialization discards 'const' qualifier from pointer target type" by @ayufan in #80

New Contributors

• @dong-zeyu made their first contribution in #77
• @foosel made their first contribution in #79
• @ayufan made their first contribution in #81

Full Changelog: v0.2.4...v0.2.5