4.19 into master #47

frank-w · 2018-10-22T16:09:55Z

No description provided.

…/git/vgupta/arc Vineet writes: "ARC updates for 4.19-rc8 - Fix clone syscall to update Thread pointer register - Make/build updates (needed for AGL/OE builds) [Alexey] - Typo fix [Colin Ian King]" * tag 'arc-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: clone syscall to setp r25 as thread pointer ARC: build: Don't set CROSS_COMPILE in arch's Makefile ARC: fix spelling mistake "entires" -> "entries" ARC: build: Get rid of toolchain check ARCv2: build: use mcpu=hs38 iso generic mcpu=archs

On some SD cards over SPI, reading with the multiblock read command the last sector will leave the card in a bad state. Remove last sectors from the multiblock reading cmd. Signed-off-by: Chris Boot <[email protected]> Signed-off-by: Clément Péron <[email protected]> Cc: [email protected] # v4.10+ Signed-off-by: Ulf Hansson <[email protected]>

The ICC_ASGI1R and ICC_SGI0R register entries in the cp15 array are not correctly ordered, leading to a BUG() at boot time. Move them to their natural location. Fixes: 3e8a8a5 ("KVM: arm: vgic-v3: Add support for ICC_SGI0R and ICC_ASGI1R accesses") Reported-by: Florian Fainelli <[email protected]> Tested-by: Florian Fainelli <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>

This reverts commit ac0e2cd. Michael reported an issue with oversized terms values assignment and I noticed there was actually a misunderstanding of the max value check in the past. The above commit's changelog says: If bit 21 is set, there is parsing issues as below. $ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/ event syntax error: '..pi_0/event=0x200002,umask=0x8/' \___ value too big for format, maximum is 511 But there's no issue there, because the event value is distributed along the value defined by the format. Even if the format defines separated bit, the value is treated as a continual number, which should follow the format definition. In above case it's 9-bit value with last bit separated: $ cat uncore_qpi_0/format/event config:0-7,21 Hence the value 0x200002 is correctly reported as format violation, because it exceeds 9 bits. It should have been 0x102 instead, which sets the 9th bit - the bit 21 of the format. $ perf stat -vv -a -e uncore_qpi_0/event=0x102,umask=0x8/ Using CPUID GenuineIntel-6-2D ... ------------------------------------------------------------ perf_event_attr: type 10 size 112 config 0x200802 sample_type IDENTIFIER ... Reported-by: Michael Petlan <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Fixes: ac0e2cd ("perf tools: Fix PMU term format max value calculation") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Add sleep between attach and "usbip port" check to make sure status is updated. Running attach and query back shows incorrect status. Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

vhci_hub_control() accesses port_status array with out of bounds port value. Fix it to reference port_status[] only with a valid rhport value when invalid_rhport flag is true. The invalid_rhport flag is set early on after detecting in port value is within the bounds or not. The following is used reproduce the problem and verify the fix: C reproducer: https://syzkaller.appspot.com/x/repro.c?x=14ed8ab6400000 Reported-by: [email protected] Cc: stable <[email protected]> Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

If a device splits up a control message and a reset() happens between the parts, the message is lost and already recieved parts must be dropped. Signed-off-by: Oliver Neukum <[email protected]> Fixes: 1aba579 ("cdc-acm: handle read pipe errors") Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Resetting the write index of the notification buffer on urb unlink (e.g. closing a cdc-acm device from userspace) may lead to wrong interpretation of further received notifications, in case the index is not 0 when urb unlink happens (i.e. when parts of a notification already have been transferred). On the device side there is no "reset" of the notification transimission and thus we would get out of sync with the device. Signed-off-by: Tobias Herzog <[email protected]> Acked-by: Oliver Neukum <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

The usb standard ("Universal Serial Bus Class Definitions for Communication Devices") distiguishes between "consistent signals" (DSR, DCD), and "irregular signals" (break, ring, parity error, framing error, overrun). The bits of "irregular signals" are set, if this error/event occurred on the device side and are immeadeatly unset, if the serial state notification was sent. Like other drivers of real serial ports do, just the occurence of those events should be counted in serial_icounter_struct (but no 1->0 transitions). Signed-off-by: Tobias Herzog <[email protected]> Acked-by: Oliver Neukum <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Add missing pm_runtime_disable() to remove(), in order to avoid an Unbalanced pm_runtime_enable when the module is removed and re-probed. Error log: root@intel-corei7-64:~# modprobe -r intel_xhci_usb_role_switch root@intel-corei7-64:~# modprobe intel_xhci_usb_role_switch intel_xhci_usb_sw intel_xhci_usb_sw: Unbalanced pm_runtime_enable! Fixes: cb29684 (usb: roles: intel_xhci: Enable runtime PM) Cc: <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Wan Ahmad Zainie <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Intel Apollo Lake has the same internal USB role mux as Intel Cherry Trail. Cc: <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Commit 64bc06b broke buffered writes to journaled files (chattr +j): we'll try to journal the buffer heads of the page being written to in gfs2_iomap_journaled_page_done. However, the iomap code no longer creates buffer heads, so we'll BUG() in gfs2_page_add_databufs. Fix that by creating buffer heads ourself when needed. Signed-off-by: Andreas Gruenbacher <[email protected]>

SEV requires access to the AMD cryptographic device APIs, and this does not work when KVM is builtin and the crypto driver is a module. Actually the Kconfig conditions for CONFIG_KVM_AMD_SEV try to disable SEV in that case, but it does not work because the actual crypto calls are not culled, only sev_hardware_setup() is. This patch adds two CONFIG_KVM_AMD_SEV checks that gate all the remaining SEV code; it fixes this particular configuration, and drops 5 KiB of code when CONFIG_KVM_AMD_SEV=n. Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

…inux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for 4.19, take #2 - Correctly order GICv3 SGI registers in the cp15 array

Memory mapped with devm_ioremap is automatically freed when the driver is disconnected from the device. Therefore there is no need to explicitly call devm_iounmap. Fixes: 0857d92 ("net: ena: add missing unmap bars on device removal") Fixes: 411838e ("net: ena: fix rare kernel crash when bar memory remap fails") Signed-off-by: Arthur Kiyanovski <[email protected]> Signed-off-by: David S. Miller <[email protected]>

…er removal In a rare scenario when ena_device_restore() fails, followed by device remove, an FLR will not be issued. In this case, the device will keep sending asynchronous AENQ keep-alive events, even after driver removal, leading to memory corruption. Fixes: 8c5c7ab ("net: ena: add power management ops to the ENA driver") Signed-off-by: Arthur Kiyanovski <[email protected]> Signed-off-by: David S. Miller <[email protected]>

napi poll functions should be initialized before running request_irq(), to handle a rare condition where there is a pending interrupt, causing the ISR to fire immediately while the poll function wasn't set yet, causing a NULL dereference. Fixes: 1738cd3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Eliminate potential auto casting compilation error. Fixes: 1738cd3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Arthur Kiyanovski says: ==================== minor bug fixes for ENA Ethernet driver Arthur Kiyanovski (4): net: ena: fix warning in rmmod caused by double iounmap net: ena: fix rare bug when failed restart/resume is followed by driver removal net: ena: fix NULL dereference due to untimely napi initialization net: ena: fix auto casting to boolean ==================== Signed-off-by: David S. Miller <[email protected]>

Commit 7e6358d ("dm: fix various targets to dm_register_target after module __init resources created") inadvertently introduced this bug when it moved dm_register_target() after the call to KMEM_CACHE(). Fixes: 7e6358d ("dm: fix various targets to dm_register_target after module __init resources created") Cc: [email protected] Signed-off-by: Shenghui Wang <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>

If dm-linear or dm-flakey are layered on top of a partition of a zoned block device, remapping of the start sector and write pointer position of the zones reported by a report zones BIO must be modified to account for the target table entry mapping (start offset within the device and entry mapping with the dm device). If the target's backing device is a partition of a whole disk, the start sector on the physical device of the partition must also be accounted for when modifying the zone information. However, dm_remap_zone_report() was not considering this last case, resulting in incorrect zone information remapping with targets using disk partitions. Fix this by calculating the target backing device start sector using the position of the completed report zones BIO and the unchanged position and size of the original report zone BIO. With this value calculated, the start sector and write pointer position of the target zones can be correctly remapped. Fixes: 1099930 ("dm: introduce dm_remap_zone_report()") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>

Currently _PAGE_DEVMAP bit is not preserved in mprotect(2) calls. As a result we will see warnings such as: BUG: Bad page map in process JobWrk0013 pte:800001803875ea25 pmd:7624381067 addr:00007f0930720000 vm_flags:280000f9 anon_vma: (null) mapping:ffff97f2384056f0 index:0 file:457-000000fe00000030-00000009-000000ca-00000001_2001.fileblock fault:xfs_filemap_fault [xfs] mmap:xfs_file_mmap [xfs] readpage: (null) CPU: 3 PID: 15848 Comm: JobWrk0013 Tainted: G W 4.12.14-2.g7573215-default #1 SLE12-SP4 (unreleased) Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 Call Trace: dump_stack+0x5a/0x75 print_bad_pte+0x217/0x2c0 ? enqueue_task_fair+0x76/0x9f0 _vm_normal_page+0xe5/0x100 zap_pte_range+0x148/0x740 unmap_page_range+0x39a/0x4b0 unmap_vmas+0x42/0x90 unmap_region+0x99/0xf0 ? vma_gap_callbacks_rotate+0x1a/0x20 do_munmap+0x255/0x3a0 vm_munmap+0x54/0x80 SyS_munmap+0x1d/0x30 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ... when mprotect(2) gets used on DAX mappings. Also there is a wide variety of other failures that can result from the missing _PAGE_DEVMAP flag when the area gets used by get_user_pages() later. Fix the problem by including _PAGE_DEVMAP in a set of flags that get preserved by mprotect(2). Fixes: 69660fd ("x86, mm: introduce _PAGE_DEVMAP") Fixes: ebd3119 ("powerpc/mm: Add devmap support for ppc64") Cc: <[email protected]> Signed-off-by: Jan Kara <[email protected]> Acked-by: Michal Hocko <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Dan Williams <[email protected]>

Signed-off-by: David S. Miller <[email protected]>

Commit 57e94c8 caused cros-ec keyboard events be truncated on many chromebooks so that Left and Right keys on Column 12 were always 0. Use ret as memcpy len to fix this. The old code was using ec_dev->event_size, which is the event payload/data size excluding event_type header, for the length of the memcpy operation. Use ret as memcpy length to avoid the off by one and copy the whole msg->data. Fixes: 57e94c8 ("mfd: cros-ec: Increase maximum mkbp event size") Acked-by: Enric Balletbo i Serra <[email protected]> Tested-by: Emil Renner Berthing <[email protected]> Signed-off-by: Emil Karlson <[email protected]> Signed-off-by: Benson Leung <[email protected]>

Signed-off-by: Paul Moore <[email protected]>

…ernel/git/mips/linux Paul writes: "A few MIPS fixes for 4.19: - Avoid suboptimal placement of our VDSO when using the legacy mmap layout, which can prevent statically linked programs that were able to allocate large amounts of memory using the brk syscall prior to the introduction of our VDSO from functioning correctly. - Fix up CONFIG_CMDLINE handling for platforms which ought to ignore DT arguments but have incorrectly used them & lost other arguments since v3.16. - Fix a path in MAINTAINERS to use valid wildcards. - Fixup a regression from v4.17 in memset() for systems using CPU_DADDI_WORKAROUNDS." * tag 'mips_fixes_4.19_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression MAINTAINERS: MIPS/LOONGSON2 ARCHITECTURE - Use the normal wildcard style MIPS: Fix CONFIG_CMDLINE handling MIPS: VDSO: Always map near top of user memory

…git/s390/linux Martin writes: "s390 fixes for 4.19-rc8 Four more patches for 4.19: - Fix resume after suspend-to-disk if resume-CPU != suspend-CPU - Fix vfio-ccw check for pinned pages - Two patches to avoid a usercopy-whitelist warning in vfio-ccw" * tag 's390-4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: Fix how vfio-ccw checks pinned pages s390/cio: Refactor alloc of ccw_io_region s390/cio: Convert ccw_io_region to pointer s390/hibernate: fix error handling when suspend cpu != resume cpu

…rnel/git/gfs2/linux-gfs2 Andreas writes: "gfs2 4.19 fix: This fixes a regression introduced in commit 64bc06b "gfs2: iomap buffered write support"" * tag 'gfs2-4.19.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix iomap buffered write support for journaled files

…ernel/git/dennis/percpu Dennis writes: "percpu fixes for-4.19-rc8 The new percpu allocator introduced in 4.14 had a missing free for the percpu metadata. This caused a memory leak when percpu memory is being churned resulting in the allocation and deallocation of percpu memory chunks" * 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: stop leaking bitmap metadata blocks

…el.org/pub/scm/linux/kernel/git/bleung/chrome-platform Benson writes: "chrome-platform fix for v4.19-rc8 This contains a fix to 57e94c8 ("mfd: cros-ec: Increase maximum mkbp event size"), which caused cros_ec based chromebooks to truncate an entire column of their built-in keyboard." * tag 'tag-chrome-platform-fixes-for-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: mfd: cros-ec: copy the whole event in get_next_event_xfer

When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by: Zong Li <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> [[email protected]: cleaned up patch description] Fixes: 92e0d14 ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: [email protected] Signed-off-by: Paul Walmsley <[email protected]>

commit 9d05c18 upstream. When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by: Zong Li <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> [[email protected]: cleaned up patch description] Fixes: 92e0d14 ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: [email protected] Signed-off-by: Paul Walmsley <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a866759 ] This reverts commit 64e62bd. This commit ends up causing some lockdep splats due to trying to grab the payload lock while holding the mgr's lock: [ 54.010099] [ 54.011765] ====================================================== [ 54.018670] WARNING: possible circular locking dependency detected [ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted [ 54.031610] ------------------------------------------------------ [ 54.038516] kworker/1:6/1040 is trying to acquire lock: [ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.054957] [ 54.054957] but task is already holding lock: [ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.071193] [ 54.071193] which lock already depends on the new lock. [ 54.071193] [ 54.080334] [ 54.080334] the existing dependency chain (in reverse order) is: [ 54.088697] [ 54.088697] -> #1 (&mgr->lock){+.+.}: [ 54.094440] __mutex_lock+0xc3/0x498 [ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80 [ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2 [ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f [ 54.117791] intel_encoders_pre_enable+0x63/0x70 [ 54.123532] hsw_crtc_enable+0xa1/0x722 [ 54.128396] intel_update_crtc+0x50/0x194 [ 54.133455] skl_commit_modeset_enables+0x40c/0x540 [ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d [ 54.145418] intel_atomic_commit+0x2c8/0x2d8 [ 54.150770] drm_atomic_helper_set_config+0x5a/0x70 [ 54.156801] drm_mode_setcrtc+0x2ab/0x833 [ 54.161862] drm_ioctl+0x2e5/0x424 [ 54.166242] vfs_ioctl+0x21/0x2f [ 54.170426] do_vfs_ioctl+0x5fb/0x61e [ 54.175096] ksys_ioctl+0x55/0x75 [ 54.179377] __x64_sys_ioctl+0x1a/0x1e [ 54.184146] do_syscall_64+0x5c/0x6d [ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 54.194946] [ 54.194946] -> #0 (&mgr->payload_lock){+.+.}: [ 54.201463] [ 54.201463] other info that might help us debug this: [ 54.201463] [ 54.210410] Possible unsafe locking scenario: [ 54.210410] [ 54.217025] CPU0 CPU1 [ 54.222082] ---- ---- [ 54.227138] lock(&mgr->lock); [ 54.230643] lock(&mgr->payload_lock); [ 54.237742] lock(&mgr->lock); [ 54.244062] lock(&mgr->payload_lock); [ 54.248346] [ 54.248346] *** DEADLOCK *** [ 54.248346] [ 54.254959] 7 locks held by kworker/1:6/1040: [ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.269451] #1: ffffc9000119beb0 ((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.}, at: i915_hotplug_work_func+0x4b/0x2be [ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+}, at: i915_hotplug_work_func+0x17e/0x2be [ 54.304061] #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x40/0xfd [ 54.314855] #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x74/0xe2 [ 54.324385] #6: ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.334597] [ 54.334597] stack backtrace: [ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted 5.5.0-rc6-02274-g77381c23ee63 #47 [ 54.348893] Hardware name: Google Fizz/Fizz, BIOS Google_Fizz.10139.39.0 01/04/2018 [ 54.357451] Workqueue: events i915_hotplug_work_func [ 54.362995] Call Trace: [ 54.365724] dump_stack+0x71/0x9c [ 54.369427] check_noncircular+0x91/0xbc [ 54.373809] ? __lock_acquire+0xc9e/0xf66 [ 54.378286] ? __lock_acquire+0xc9e/0xf66 [ 54.382763] ? lock_acquire+0x175/0x1ac [ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.393177] ? __mutex_lock+0xc3/0x498 [ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101 [ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.426645] ? intel_digital_port_connected+0x34d/0x35c [ 54.432482] ? intel_dp_detect+0x227/0x44e [ 54.437056] ? ww_mutex_lock+0x49/0x9a [ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd [ 54.446789] ? intel_encoder_hotplug+0x4b/0x97 [ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0 [ 54.456423] ? mark_held_locks+0x53/0x68 [ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51 [ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4 [ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a [ 54.476953] ? i915_hotplug_work_func+0x206/0x2be [ 54.482208] ? worker_thread+0x4d5/0x6e2 [ 54.486587] ? worker_thread+0x455/0x6e2 [ 54.490966] ? queue_work_on+0x64/0x64 [ 54.495151] ? kthread+0x1e9/0x1f1 [ 54.498946] ? queue_work_on+0x64/0x64 [ 54.503130] ? kthread_unpark+0x5e/0x5e [ 54.507413] ? ret_from_fork+0x3a/0x50 The proper fix for this is probably cleanup the VCPI allocations when we're enabling the topology, or on the first payload allocation. For now though, let's just revert. Signed-off-by: Lyude Paul <[email protected]> Fixes: 64e62bd ("drm/dp_mst: Remove VCPI while disabling topology mgr") Cc: Sean Paul <[email protected]> Cc: Wayne Lin <[email protected]> Reviewed-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

Running the eBPF test_verifier leads to random errors looking like this: [ 6525.735488] Unexpected kernel BRK exception at EL1 [ 6525.735502] Internal error: ptrace BRK handler: f2000100 [#1] SMP [ 6525.741609] Modules linked in: nls_utf8 cifs libdes libarc4 dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul efi_pstore sha2_ce sha256_arm64 sha1_ce evdev efivars efivarfs ip_tables x_tables autofs4 btrfs blake2b_generic xor xor_neon zstd_compress raid6_pq libcrc32c crc32c_generic ahci xhci_pci libahci xhci_hcd igb libata i2c_algo_bit nvme realtek usbcore nvme_core scsi_mod t10_pi netsec mdio_devres of_mdio gpio_keys fixed_phy libphy gpio_mb86s7x [ 6525.787760] CPU: 3 PID: 7881 Comm: test_verifier Tainted: G W 5.9.0-rc1+ #47 [ 6525.796111] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Jun 6 2020 [ 6525.804812] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 6525.810390] pc : bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.815613] lr : bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.820832] sp : ffff8000130cbb80 [ 6525.824141] x29: ffff8000130cbbb0 x28: 0000000000000000 [ 6525.829451] x27: 000005ef6fcbf39b x26: 0000000000000000 [ 6525.834759] x25: ffff8000130cbb80 x24: ffff800011dc7038 [ 6525.840067] x23: ffff8000130cbd00 x22: ffff0008f624d080 [ 6525.845375] x21: 0000000000000001 x20: ffff800011dc7000 [ 6525.850682] x19: 0000000000000000 x18: 0000000000000000 [ 6525.855990] x17: 0000000000000000 x16: 0000000000000000 [ 6525.861298] x15: 0000000000000000 x14: 0000000000000000 [ 6525.866606] x13: 0000000000000000 x12: 0000000000000000 [ 6525.871913] x11: 0000000000000001 x10: ffff8000000a660c [ 6525.877220] x9 : ffff800010951810 x8 : ffff8000130cbc38 [ 6525.882528] x7 : 0000000000000000 x6 : 0000009864cfa881 [ 6525.887836] x5 : 00ffffffffffffff x4 : 002880ba1a0b3e9f [ 6525.893144] x3 : 0000000000000018 x2 : ffff8000000a4374 [ 6525.898452] x1 : 000000000000000a x0 : 0000000000000009 [ 6525.903760] Call trace: [ 6525.906202] bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.911076] bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.915957] bpf_dispatcher_xdp_func+0x14/0x20 [ 6525.920398] bpf_test_run+0x70/0x1b0 [ 6525.923969] bpf_prog_test_run_xdp+0xec/0x190 [ 6525.928326] __do_sys_bpf+0xc88/0x1b28 [ 6525.932072] __arm64_sys_bpf+0x24/0x30 [ 6525.935820] el0_svc_common.constprop.0+0x70/0x168 [ 6525.940607] do_el0_svc+0x28/0x88 [ 6525.943920] el0_sync_handler+0x88/0x190 [ 6525.947838] el0_sync+0x140/0x180 [ 6525.951154] Code: d4202000 d4202000 d4202000 d4202000 (d4202000) [ 6525.957249] ---[ end trace cecc3f93b14927e2 ]--- The reason is the offset[] creation and later usage, while building the eBPF body. The code currently omits the first instruction, since build_insn() will increase our ctx->idx before saving it. That was fine up until bounded eBPF loops were introduced. After that introduction, offset[0] must be the offset of the end of prologue which is the start of the 1st insn while, offset[n] holds the offset of the end of n-th insn. When "taken loop with back jump to 1st insn" test runs, it will eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is permitted, the current outcome depends on the value stored in ctx->offset[-1], which has nothing to do with our array. If the value happens to be 0 the tests will work. If not this error triggers. commit 7c2e988 ("bpf: fix x64 JIT code generation for jmp to 1st insn") fixed an indentical bug on x86 when eBPF bounded loops were introduced. So let's fix it by creating the ctx->offset[] differently. Track the beginning of instruction and account for the extra instruction while calculating the arm instruction offsets. Fixes: 2589726 ("bpf: introduce bounded loops") Reported-by: Naresh Kamboju <[email protected]> Reported-by: Jiri Olsa <[email protected]> Co-developed-by: Jean-Philippe Brucker <[email protected]> Co-developed-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]> Acked-by: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>

[ Upstream commit 32f6865 ] Running the eBPF test_verifier leads to random errors looking like this: [ 6525.735488] Unexpected kernel BRK exception at EL1 [ 6525.735502] Internal error: ptrace BRK handler: f2000100 [#1] SMP [ 6525.741609] Modules linked in: nls_utf8 cifs libdes libarc4 dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul efi_pstore sha2_ce sha256_arm64 sha1_ce evdev efivars efivarfs ip_tables x_tables autofs4 btrfs blake2b_generic xor xor_neon zstd_compress raid6_pq libcrc32c crc32c_generic ahci xhci_pci libahci xhci_hcd igb libata i2c_algo_bit nvme realtek usbcore nvme_core scsi_mod t10_pi netsec mdio_devres of_mdio gpio_keys fixed_phy libphy gpio_mb86s7x [ 6525.787760] CPU: 3 PID: 7881 Comm: test_verifier Tainted: G W 5.9.0-rc1+ #47 [ 6525.796111] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Jun 6 2020 [ 6525.804812] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 6525.810390] pc : bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.815613] lr : bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.820832] sp : ffff8000130cbb80 [ 6525.824141] x29: ffff8000130cbbb0 x28: 0000000000000000 [ 6525.829451] x27: 000005ef6fcbf39b x26: 0000000000000000 [ 6525.834759] x25: ffff8000130cbb80 x24: ffff800011dc7038 [ 6525.840067] x23: ffff8000130cbd00 x22: ffff0008f624d080 [ 6525.845375] x21: 0000000000000001 x20: ffff800011dc7000 [ 6525.850682] x19: 0000000000000000 x18: 0000000000000000 [ 6525.855990] x17: 0000000000000000 x16: 0000000000000000 [ 6525.861298] x15: 0000000000000000 x14: 0000000000000000 [ 6525.866606] x13: 0000000000000000 x12: 0000000000000000 [ 6525.871913] x11: 0000000000000001 x10: ffff8000000a660c [ 6525.877220] x9 : ffff800010951810 x8 : ffff8000130cbc38 [ 6525.882528] x7 : 0000000000000000 x6 : 0000009864cfa881 [ 6525.887836] x5 : 00ffffffffffffff x4 : 002880ba1a0b3e9f [ 6525.893144] x3 : 0000000000000018 x2 : ffff8000000a4374 [ 6525.898452] x1 : 000000000000000a x0 : 0000000000000009 [ 6525.903760] Call trace: [ 6525.906202] bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.911076] bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.915957] bpf_dispatcher_xdp_func+0x14/0x20 [ 6525.920398] bpf_test_run+0x70/0x1b0 [ 6525.923969] bpf_prog_test_run_xdp+0xec/0x190 [ 6525.928326] __do_sys_bpf+0xc88/0x1b28 [ 6525.932072] __arm64_sys_bpf+0x24/0x30 [ 6525.935820] el0_svc_common.constprop.0+0x70/0x168 [ 6525.940607] do_el0_svc+0x28/0x88 [ 6525.943920] el0_sync_handler+0x88/0x190 [ 6525.947838] el0_sync+0x140/0x180 [ 6525.951154] Code: d4202000 d4202000 d4202000 d4202000 (d4202000) [ 6525.957249] ---[ end trace cecc3f93b14927e2 ]--- The reason is the offset[] creation and later usage, while building the eBPF body. The code currently omits the first instruction, since build_insn() will increase our ctx->idx before saving it. That was fine up until bounded eBPF loops were introduced. After that introduction, offset[0] must be the offset of the end of prologue which is the start of the 1st insn while, offset[n] holds the offset of the end of n-th insn. When "taken loop with back jump to 1st insn" test runs, it will eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is permitted, the current outcome depends on the value stored in ctx->offset[-1], which has nothing to do with our array. If the value happens to be 0 the tests will work. If not this error triggers. commit 7c2e988 ("bpf: fix x64 JIT code generation for jmp to 1st insn") fixed an indentical bug on x86 when eBPF bounded loops were introduced. So let's fix it by creating the ctx->offset[] differently. Track the beginning of instruction and account for the extra instruction while calculating the arm instruction offsets. Fixes: 2589726 ("bpf: introduce bounded loops") Reported-by: Naresh Kamboju <[email protected]> Reported-by: Jiri Olsa <[email protected]> Co-developed-by: Jean-Philippe Brucker <[email protected]> Co-developed-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Ilias Apalodimas <[email protected]> Acked-by: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7948fab ] The use of msleep() in the restart handler will cause scheduler to induce a context switch which is not desirable. This generates below warning on SDX55 when WDT is the only available restart source: [ 39.800188] reboot: Restarting system [ 39.804115] ------------[ cut here ]------------ [ 39.807855] WARNING: CPU: 0 PID: 678 at kernel/rcu/tree_plugin.h:297 rcu_note_context_switch+0x190/0x764 [ 39.812538] Modules linked in: [ 39.821954] CPU: 0 PID: 678 Comm: reboot Not tainted 5.10.0-rc1-00063-g33a9990d1d66-dirty #47 [ 39.824854] Hardware name: Generic DT based system [ 39.833470] [<c0310fbc>] (unwind_backtrace) from [<c030c544>] (show_stack+0x10/0x14) [ 39.838154] [<c030c544>] (show_stack) from [<c0c218f0>] (dump_stack+0x8c/0xa0) [ 39.846049] [<c0c218f0>] (dump_stack) from [<c0322f80>] (__warn+0xd8/0xf0) [ 39.853058] [<c0322f80>] (__warn) from [<c0c1dc08>] (warn_slowpath_fmt+0x64/0xc8) [ 39.859925] [<c0c1dc08>] (warn_slowpath_fmt) from [<c038b6f4>] (rcu_note_context_switch+0x190/0x764) [ 39.867503] [<c038b6f4>] (rcu_note_context_switch) from [<c0c2aa3c>] (__schedule+0x84/0x640) [ 39.876685] [<c0c2aa3c>] (__schedule) from [<c0c2b050>] (schedule+0x58/0x10c) [ 39.885095] [<c0c2b050>] (schedule) from [<c0c2eed0>] (schedule_timeout+0x1e8/0x3d4) [ 39.892135] [<c0c2eed0>] (schedule_timeout) from [<c039ad40>] (msleep+0x2c/0x38) [ 39.899947] [<c039ad40>] (msleep) from [<c0a59d0c>] (qcom_wdt_restart+0xc4/0xcc) [ 39.907319] [<c0a59d0c>] (qcom_wdt_restart) from [<c0a58290>] (watchdog_restart_notifier+0x18/0x28) [ 39.914715] [<c0a58290>] (watchdog_restart_notifier) from [<c03468e0>] (atomic_notifier_call_chain+0x60/0x84) [ 39.923487] [<c03468e0>] (atomic_notifier_call_chain) from [<c030ae64>] (machine_restart+0x78/0x7c) [ 39.933551] [<c030ae64>] (machine_restart) from [<c0348048>] (__do_sys_reboot+0xdc/0x1e0) [ 39.942397] [<c0348048>] (__do_sys_reboot) from [<c0300060>] (ret_fast_syscall+0x0/0x54) [ 39.950721] Exception stack(0xc3e0bfa8 to 0xc3e0bff0) [ 39.958855] bfa0: 0001221c bed2fe24 fee1dead 28121969 01234567 00000000 [ 39.963832] bfc0: 0001221c bed2fe24 00000003 00000058 000225e0 00000000 00000000 00000000 [ 39.971985] bfe0: b6e62560 bed2fc84 00010fd8 b6e62580 [ 39.980124] ---[ end trace 3f578288bad866e4 ]--- Hence, replace msleep() with mdelay() to fix this issue. Fixes: 05e487d ("watchdog: qcom: register a restart notifier") Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Acked-By: Anton Ivanov <[email protected]> Tested-By: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Richard Weinberger <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

When CONFIG_FRAME_POINTER=y, calling dump_stack() can always trigger NULL pointer dereference panic similar as below: [ 0.396060] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5+ #47 [ 0.396692] Hardware name: riscv-virtio,qemu (DT) [ 0.397176] Call Trace: [ 0.398191] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000960 [ 0.399487] Oops [#1] [ 0.399739] Modules linked in: [ 0.400135] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5+ #47 [ 0.400570] Hardware name: riscv-virtio,qemu (DT) [ 0.400926] epc : walk_stackframe+0xc4/0xdc [ 0.401291] ra : dump_backtrace+0x30/0x38 [ 0.401630] epc : ffffffff80004922 ra : ffffffff8000496a sp : ffffffe000f3bd00 [ 0.402115] gp : ffffffff80cfdcb8 tp : ffffffe000f30000 t0 : ffffffff80d0b0cf [ 0.402602] t1 : ffffffff80d0b0c0 t2 : 0000000000000000 s0 : ffffffe000f3bd60 [ 0.403071] s1 : ffffffff808bc2e8 a0 : 0000000000001000 a1 : 0000000000000000 [ 0.403448] a2 : ffffffff803d7088 a3 : ffffffff808bc2e8 a4 : 6131725dbc24d400 [ 0.403820] a5 : 0000000000001000 a6 : 0000000000000002 a7 : ffffffffffffffff [ 0.404226] s2 : 0000000000000000 s3 : 0000000000000000 s4 : 0000000000000000 [ 0.404634] s5 : ffffffff803d7088 s6 : ffffffff808bc2e8 s7 : ffffffff80630650 [ 0.405085] s8 : ffffffff80912a80 s9 : 0000000000000008 s10: ffffffff804000fc [ 0.405388] s11: 0000000000000000 t3 : 0000000000000043 t4 : ffffffffffffffff [ 0.405616] t5 : 000000000000003d t6 : ffffffe000f3baa8 [ 0.405793] status: 0000000000000100 badaddr: 0000000000000960 cause: 000000000000000d [ 0.406135] [<ffffffff80004922>] walk_stackframe+0xc4/0xdc [ 0.407032] [<ffffffff8000496a>] dump_backtrace+0x30/0x38 [ 0.407797] [<ffffffff803d7100>] show_stack+0x40/0x4c [ 0.408234] [<ffffffff803d9e5c>] dump_stack+0x90/0xb6 [ 0.409019] [<ffffffff8040423e>] ptdump_init+0x20/0xc4 [ 0.409681] [<ffffffff800015b6>] do_one_initcall+0x4c/0x226 [ 0.410110] [<ffffffff80401094>] kernel_init_freeable+0x1f4/0x258 [ 0.410562] [<ffffffff803dba88>] kernel_init+0x22/0x148 [ 0.410959] [<ffffffff800029e2>] ret_from_exception+0x0/0x14 [ 0.412241] ---[ end trace b2ab92c901b96251 ]--- [ 0.413099] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b The reason is the task is NULL when we finally call walk_stackframe() the NULL is passed from __dump_stack(): |static void __dump_stack(void) |{ | dump_stack_print_info(KERN_DEFAULT); | show_stack(NULL, NULL, KERN_DEFAULT); |} Fix this issue by checking "task == NULL" case in walk_stackframe(). Fixes: eac2f30 ("riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled") Signed-off-by: Jisheng Zhang <[email protected]> Reviewed-by: Atish Patra <[email protected]> Tested-by: Wende Tan <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>

Normally the zero fill would hide the missing initialization, but an errant set to desc_size in reg_create() causes a crash: BUG: unable to handle page fault for address: 0000000800000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 5 PID: 890 Comm: ib_write_bw Not tainted 5.15.0-rc4+ #47 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_ib_dereg_mr+0x14/0x3b0 [mlx5_ib] Code: 48 63 cd 4c 89 f7 48 89 0c 24 e8 37 30 03 e1 48 8b 0c 24 eb a0 90 0f 1f 44 00 00 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 30 <48> 8b 2f 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 8b 87 c8 RSP: 0018:ffff88811afa3a60 EFLAGS: 00010286 RAX: 000000000000001c RBX: 0000000800000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000800000000 RBP: 0000000800000000 R08: 0000000000000000 R09: c0000000fffff7ff R10: ffff88811afa38f8 R11: ffff88811afa38f0 R12: ffffffffa02c7ac0 R13: 0000000000000000 R14: ffff88811afa3cd8 R15: ffff88810772fa00 FS: 00007f47b9080740(0000) GS:ffff88852cd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000800000000 CR3: 000000010761e003 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_free_odp_mr+0x95/0xc0 [mlx5_ib] mlx5_ib_dereg_mr+0x128/0x3b0 [mlx5_ib] ib_dereg_mr_user+0x45/0xb0 [ib_core] ? xas_load+0x8/0x80 destroy_hw_idr_uobject+0x1a/0x50 [ib_uverbs] uverbs_destroy_uobject+0x2f/0x150 [ib_uverbs] uobj_destroy+0x3c/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x467/0xb00 [ib_uverbs] ? uverbs_finalize_object+0x60/0x60 [ib_uverbs] ? ttwu_queue_wakelist+0xa9/0xe0 ? pty_write+0x85/0x90 ? file_tty_write.isra.33+0x214/0x330 ? process_echoes+0x60/0x60 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] __x64_sys_ioctl+0x10d/0x8e0 ? vfs_write+0x17f/0x260 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Add the missing xarray initialization and remove the desc_size set. Fixes: a639e66 ("RDMA/mlx5: Zero out ODP related items in the mlx5_ib_mr") Link: https://lore.kernel.org/r/a4846a11c9de834663e521770da895007f9f0d30.1634642730.git.leonro@nvidia.com Signed-off-by: Aharon Landau <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>

[ Upstream commit ffb76a8 ] Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandler. ipmi_msghander module uninstalled, and the module space will be freed. T3: bmc->remove_work doing cleanup the bmc resource. -> cleanup_bmc_work() -> platform_device_unregister(&bmc->pdev); -> platform_device_del(pdev); -> device_del(&pdev->dev); -> kobject_uevent(&dev->kobj, KOBJ_REMOVE); -> kobject_uevent_env() -> dev_uevent() -> if (dev->type && dev->type->name) 'dev->type'(bmc_device_type) pointer space has freed when uninstall ipmi_msghander module, 'dev->type->name' cause the system crash. drivers/char/ipmi/ipmi_msghandler.c: 2820 static const struct device_type bmc_device_type = { 2821 .groups = bmc_dev_attr_groups, 2822 }; Steps to reproduce: Add a time delay in cleanup_bmc_work() function, and uninstall ipmi_si and ipmi_msghandler module. 2910 static void cleanup_bmc_work(struct work_struct *work) 2911 { 2912 struct bmc_device *bmc = container_of(work, struct bmc_device, 2913 remove_work); 2914 int id = bmc->pdev.id; /* Unregister overwrites id */ 2915 2916 msleep(3000); <--- 2917 platform_device_unregister(&bmc->pdev); 2918 ida_simple_remove(&ipmi_bmc_ida, id); 2919 } Use 'remove_work_wq' instead of 'system_wq' to solve this issues. Fixes: b2cfd8a ("ipmi: Rework device id and guid handling to catch changing BMCs") Signed-off-by: Wu Bo <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 03c1f1e ] syzbot reported a warning like below [1]: WARNING: CPU: 3 PID: 9 at net/netfilter/nf_tables_api.c:10096 nf_tables_exit_net+0x71c/0x840 Modules linked in: CPU: 2 PID: 9 Comm: kworker/u8:0 Tainted: G W 6.1.0-rc3-00072-g8e5423e991e8 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:nf_tables_exit_net+0x71c/0x840 ... Call Trace: <TASK> ? __nft_release_table+0xfc0/0xfc0 ops_exit_list+0xb5/0x180 cleanup_net+0x506/0xb10 ? unregister_pernet_device+0x80/0x80 process_one_work+0xa38/0x1730 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 ? rwlock_bug.part.0+0x90/0x90 ? _raw_spin_lock_irq+0x46/0x50 worker_thread+0x67e/0x10e0 ? process_one_work+0x1730/0x1730 kthread+0x2e5/0x3a0 ? kthread_complete_and_exit+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> In nf_tables_exit_net(), there is a case where nft_net->commit_list is empty but nft_net->module_list is not empty. Such a case occurs with the following scenario: 1. nfnetlink_rcv_batch() is called 2. nf_tables_newset() returns -EAGAIN and NFNL_BATCH_FAILURE bit is set to status 3. nf_tables_abort() is called with NFNL_ABORT_AUTOLOAD (nft_net->commit_list is released, but nft_net->module_list is not because of NFNL_ABORT_AUTOLOAD flag) 4. Jump to replay label 5. netlink_skb_clone() fails and returns from the function (this is caused by fault injection in the reproducer of syzbot) This patch fixes this issue by calling __nf_tables_abort() when nft_net->module_list is not empty in nf_tables_exit_net(). Fixes: eb014de ("netfilter: nf_tables: autoload modules from the abort path") Link: https://syzkaller.appspot.com/bug?id=802aba2422de4218ad0c01b46c9525cc9d4e4aa3 [1] Reported-by: [email protected] Signed-off-by: Shigeru Yoshida <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

syzbot reported a warning[1] where the bond device itself is a slave and we try to enslave a non-ethernet device as the first slave which fails but then in the error path when ether_setup() restores the bond device it also clears all flags. In my previous fix[2] I restored the IFF_MASTER flag, but I didn't consider the case that the bond device itself might also be a slave with IFF_SLAVE set, so we need to restore that flag as well. Use the bond_ether_setup helper which does the right thing and restores the bond's flags properly. Steps to reproduce using a nlmon dev: $ ip l add nlmon0 type nlmon $ ip l add bond1 type bond $ ip l add bond2 type bond $ ip l set bond1 master bond2 $ ip l set dev nlmon0 master bond1 $ ip -d l sh dev bond1 22: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000 (now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we try to delete it) [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef [2] commit 7d5cd2c ("bonding: correctly handle bonding type change on enslave failure") [3] example warning: [ 27.008664] bond1: (slave nlmon0): The slave device specified does not support setting the MAC address [ 27.008692] bond1: (slave nlmon0): Error -95 calling set_mac_address [ 32.464639] bond1 (unregistering): Released all slaves [ 32.464685] ------------[ cut here ]------------ [ 32.464686] WARNING: CPU: 1 PID: 2004 at net/core/dev.c:10829 unregister_netdevice_many+0x72a/0x780 [ 32.464694] Modules linked in: br_netfilter bridge bonding virtio_net [ 32.464699] CPU: 1 PID: 2004 Comm: ip Kdump: loaded Not tainted 5.18.0-rc3+ #47 [ 32.464703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 32.464704] RIP: 0010:unregister_netdevice_many+0x72a/0x780 [ 32.464707] Code: 99 fd ff ff ba 90 1a 00 00 48 c7 c6 f4 02 66 96 48 c7 c7 20 4d 35 96 c6 05 fa c7 2b 02 01 e8 be 6f 4a 00 0f 0b e9 73 fd ff ff <0f> 0b e9 5f fd ff ff 80 3d e3 c7 2b 02 00 0f 85 3b fd ff ff ba 59 [ 32.464710] RSP: 0018:ffffa006422d7820 EFLAGS: 00010206 [ 32.464712] RAX: ffff8f6e077140a0 RBX: ffffa006422d7888 RCX: 0000000000000000 [ 32.464714] RDX: ffff8f6e12edbe58 RSI: 0000000000000296 RDI: ffffffff96d4a520 [ 32.464716] RBP: ffff8f6e07714000 R08: ffffffff96d63600 R09: ffffa006422d7728 [ 32.464717] R10: 0000000000000ec0 R11: ffffffff9698c988 R12: ffff8f6e12edb140 [ 32.464719] R13: dead000000000122 R14: dead000000000100 R15: ffff8f6e12edb140 [ 32.464723] FS: 00007f297c2f1740(0000) GS:ffff8f6e5d900000(0000) knlGS:0000000000000000 [ 32.464725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.464726] CR2: 00007f297bf1c800 CR3: 00000000115e8000 CR4: 0000000000350ee0 [ 32.464730] Call Trace: [ 32.464763] <TASK> [ 32.464767] rtnl_dellink+0x13e/0x380 [ 32.464776] ? cred_has_capability.isra.0+0x68/0x100 [ 32.464780] ? __rtnl_unlock+0x33/0x60 [ 32.464783] ? bpf_lsm_capset+0x10/0x10 [ 32.464786] ? security_capable+0x36/0x50 [ 32.464790] rtnetlink_rcv_msg+0x14e/0x3b0 [ 32.464792] ? _copy_to_iter+0xb1/0x790 [ 32.464796] ? post_alloc_hook+0xa0/0x160 [ 32.464799] ? rtnl_calcit.isra.0+0x110/0x110 [ 32.464802] netlink_rcv_skb+0x50/0xf0 [ 32.464806] netlink_unicast+0x216/0x340 [ 32.464809] netlink_sendmsg+0x23f/0x480 [ 32.464812] sock_sendmsg+0x5e/0x60 [ 32.464815] ____sys_sendmsg+0x22c/0x270 [ 32.464818] ? import_iovec+0x17/0x20 [ 32.464821] ? sendmsg_copy_msghdr+0x59/0x90 [ 32.464823] ? do_set_pte+0xa0/0xe0 [ 32.464828] ___sys_sendmsg+0x81/0xc0 [ 32.464832] ? mod_objcg_state+0xc6/0x300 [ 32.464835] ? refill_obj_stock+0xa9/0x160 [ 32.464838] ? memcg_slab_free_hook+0x1a5/0x1f0 [ 32.464842] __sys_sendmsg+0x49/0x80 [ 32.464847] do_syscall_64+0x3b/0x90 [ 32.464851] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 32.464865] RIP: 0033:0x7f297bf2e5e7 [ 32.464868] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 32.464869] RSP: 002b:00007ffd96c824c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 32.464872] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297bf2e5e7 [ 32.464874] RDX: 0000000000000000 RSI: 00007ffd96c82540 RDI: 0000000000000003 [ 32.464875] RBP: 00000000640f19de R08: 0000000000000001 R09: 000000000000007c [ 32.464876] R10: 00007f297bffabe0 R11: 0000000000000246 R12: 0000000000000001 [ 32.464877] R13: 00007ffd96c82d20 R14: 00007ffd96c82610 R15: 000055bfe38a7020 [ 32.464881] </TASK> [ 32.464882] ---[ end trace 0000000000000000 ]--- Fixes: 7d5cd2c ("bonding: correctly handle bonding type change on enslave failure") Reported-by: [email protected] Link: https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef Signed-off-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Acked-by: Jonathan Toppins <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit e667d46 ] syzbot reported a warning[1] where the bond device itself is a slave and we try to enslave a non-ethernet device as the first slave which fails but then in the error path when ether_setup() restores the bond device it also clears all flags. In my previous fix[2] I restored the IFF_MASTER flag, but I didn't consider the case that the bond device itself might also be a slave with IFF_SLAVE set, so we need to restore that flag as well. Use the bond_ether_setup helper which does the right thing and restores the bond's flags properly. Steps to reproduce using a nlmon dev: $ ip l add nlmon0 type nlmon $ ip l add bond1 type bond $ ip l add bond2 type bond $ ip l set bond1 master bond2 $ ip l set dev nlmon0 master bond1 $ ip -d l sh dev bond1 22: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000 (now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we try to delete it) [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef [2] commit 7d5cd2c ("bonding: correctly handle bonding type change on enslave failure") [3] example warning: [ 27.008664] bond1: (slave nlmon0): The slave device specified does not support setting the MAC address [ 27.008692] bond1: (slave nlmon0): Error -95 calling set_mac_address [ 32.464639] bond1 (unregistering): Released all slaves [ 32.464685] ------------[ cut here ]------------ [ 32.464686] WARNING: CPU: 1 PID: 2004 at net/core/dev.c:10829 unregister_netdevice_many+0x72a/0x780 [ 32.464694] Modules linked in: br_netfilter bridge bonding virtio_net [ 32.464699] CPU: 1 PID: 2004 Comm: ip Kdump: loaded Not tainted 5.18.0-rc3+ #47 [ 32.464703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 32.464704] RIP: 0010:unregister_netdevice_many+0x72a/0x780 [ 32.464707] Code: 99 fd ff ff ba 90 1a 00 00 48 c7 c6 f4 02 66 96 48 c7 c7 20 4d 35 96 c6 05 fa c7 2b 02 01 e8 be 6f 4a 00 0f 0b e9 73 fd ff ff <0f> 0b e9 5f fd ff ff 80 3d e3 c7 2b 02 00 0f 85 3b fd ff ff ba 59 [ 32.464710] RSP: 0018:ffffa006422d7820 EFLAGS: 00010206 [ 32.464712] RAX: ffff8f6e077140a0 RBX: ffffa006422d7888 RCX: 0000000000000000 [ 32.464714] RDX: ffff8f6e12edbe58 RSI: 0000000000000296 RDI: ffffffff96d4a520 [ 32.464716] RBP: ffff8f6e07714000 R08: ffffffff96d63600 R09: ffffa006422d7728 [ 32.464717] R10: 0000000000000ec0 R11: ffffffff9698c988 R12: ffff8f6e12edb140 [ 32.464719] R13: dead000000000122 R14: dead000000000100 R15: ffff8f6e12edb140 [ 32.464723] FS: 00007f297c2f1740(0000) GS:ffff8f6e5d900000(0000) knlGS:0000000000000000 [ 32.464725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.464726] CR2: 00007f297bf1c800 CR3: 00000000115e8000 CR4: 0000000000350ee0 [ 32.464730] Call Trace: [ 32.464763] <TASK> [ 32.464767] rtnl_dellink+0x13e/0x380 [ 32.464776] ? cred_has_capability.isra.0+0x68/0x100 [ 32.464780] ? __rtnl_unlock+0x33/0x60 [ 32.464783] ? bpf_lsm_capset+0x10/0x10 [ 32.464786] ? security_capable+0x36/0x50 [ 32.464790] rtnetlink_rcv_msg+0x14e/0x3b0 [ 32.464792] ? _copy_to_iter+0xb1/0x790 [ 32.464796] ? post_alloc_hook+0xa0/0x160 [ 32.464799] ? rtnl_calcit.isra.0+0x110/0x110 [ 32.464802] netlink_rcv_skb+0x50/0xf0 [ 32.464806] netlink_unicast+0x216/0x340 [ 32.464809] netlink_sendmsg+0x23f/0x480 [ 32.464812] sock_sendmsg+0x5e/0x60 [ 32.464815] ____sys_sendmsg+0x22c/0x270 [ 32.464818] ? import_iovec+0x17/0x20 [ 32.464821] ? sendmsg_copy_msghdr+0x59/0x90 [ 32.464823] ? do_set_pte+0xa0/0xe0 [ 32.464828] ___sys_sendmsg+0x81/0xc0 [ 32.464832] ? mod_objcg_state+0xc6/0x300 [ 32.464835] ? refill_obj_stock+0xa9/0x160 [ 32.464838] ? memcg_slab_free_hook+0x1a5/0x1f0 [ 32.464842] __sys_sendmsg+0x49/0x80 [ 32.464847] do_syscall_64+0x3b/0x90 [ 32.464851] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 32.464865] RIP: 0033:0x7f297bf2e5e7 [ 32.464868] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 32.464869] RSP: 002b:00007ffd96c824c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 32.464872] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297bf2e5e7 [ 32.464874] RDX: 0000000000000000 RSI: 00007ffd96c82540 RDI: 0000000000000003 [ 32.464875] RBP: 00000000640f19de R08: 0000000000000001 R09: 000000000000007c [ 32.464876] R10: 00007f297bffabe0 R11: 0000000000000246 R12: 0000000000000001 [ 32.464877] R13: 00007ffd96c82d20 R14: 00007ffd96c82610 R15: 000055bfe38a7020 [ 32.464881] </TASK> [ 32.464882] ---[ end trace 0000000000000000 ]--- Fixes: 7d5cd2c ("bonding: correctly handle bonding type change on enslave failure") Reported-by: [email protected] Link: https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef Signed-off-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Acked-by: Jonathan Toppins <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Christoph reported that the MPTCP protocol can find the subflow-level write queue unexpectedly not empty while crafting a zero-window probe, hitting a warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 188 at net/mptcp/protocol.c:1312 mptcp_sendmsg_frag+0xc06/0xe70 Modules linked in: CPU: 0 PID: 188 Comm: kworker/0:2 Not tainted 6.6.0-rc2-g1176aa719d7a #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:mptcp_sendmsg_frag+0xc06/0xe70 net/mptcp/protocol.c:1312 RAX: 47d0530de347ff6a RBX: 47d0530de347ff6b RCX: ffff8881015d3c00 RDX: ffff8881015d3c00 RSI: 47d0530de347ff6b RDI: 47d0530de347ff6b RBP: 47d0530de347ff6b R08: ffffffff8243c6a8 R09: ffffffff82042d9c R10: 0000000000000002 R11: ffffffff82056850 R12: ffff88812a13d580 R13: 0000000000000001 R14: ffff88812b375e50 R15: ffff88812bbf3200 FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000695118 CR3: 0000000115dfc001 CR4: 0000000000170ef0 Call Trace: <TASK> __subflow_push_pending+0xa4/0x420 net/mptcp/protocol.c:1545 __mptcp_push_pending+0x128/0x3b0 net/mptcp/protocol.c:1614 mptcp_release_cb+0x218/0x5b0 net/mptcp/protocol.c:3391 release_sock+0xf6/0x100 net/core/sock.c:3521 mptcp_worker+0x6e8/0x8f0 net/mptcp/protocol.c:2746 process_scheduled_works+0x341/0x690 kernel/workqueue.c:2630 worker_thread+0x3a7/0x610 kernel/workqueue.c:2784 kthread+0x143/0x180 kernel/kthread.c:388 ret_from_fork+0x4d/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:304 </TASK> The root cause of the issue is that expectations are wrong: e.g. due to MPTCP-level re-injection we can hit the critical condition. Explicitly avoid the zero-window probe when the subflow write queue is not empty and drop the related warnings. Reported-by: Christoph Paasch <[email protected]> Closes: multipath-tcp/mptcp_net-next#444 Fixes: f70cad1 ("mptcp: stop relying on tcp_tx_skb_cache") Cc: [email protected] Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

commit 72377ab upstream. Christoph reported that the MPTCP protocol can find the subflow-level write queue unexpectedly not empty while crafting a zero-window probe, hitting a warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 188 at net/mptcp/protocol.c:1312 mptcp_sendmsg_frag+0xc06/0xe70 Modules linked in: CPU: 0 PID: 188 Comm: kworker/0:2 Not tainted 6.6.0-rc2-g1176aa719d7a #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:mptcp_sendmsg_frag+0xc06/0xe70 net/mptcp/protocol.c:1312 RAX: 47d0530de347ff6a RBX: 47d0530de347ff6b RCX: ffff8881015d3c00 RDX: ffff8881015d3c00 RSI: 47d0530de347ff6b RDI: 47d0530de347ff6b RBP: 47d0530de347ff6b R08: ffffffff8243c6a8 R09: ffffffff82042d9c R10: 0000000000000002 R11: ffffffff82056850 R12: ffff88812a13d580 R13: 0000000000000001 R14: ffff88812b375e50 R15: ffff88812bbf3200 FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000695118 CR3: 0000000115dfc001 CR4: 0000000000170ef0 Call Trace: <TASK> __subflow_push_pending+0xa4/0x420 net/mptcp/protocol.c:1545 __mptcp_push_pending+0x128/0x3b0 net/mptcp/protocol.c:1614 mptcp_release_cb+0x218/0x5b0 net/mptcp/protocol.c:3391 release_sock+0xf6/0x100 net/core/sock.c:3521 mptcp_worker+0x6e8/0x8f0 net/mptcp/protocol.c:2746 process_scheduled_works+0x341/0x690 kernel/workqueue.c:2630 worker_thread+0x3a7/0x610 kernel/workqueue.c:2784 kthread+0x143/0x180 kernel/kthread.c:388 ret_from_fork+0x4d/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:304 </TASK> The root cause of the issue is that expectations are wrong: e.g. due to MPTCP-level re-injection we can hit the critical condition. Explicitly avoid the zero-window probe when the subflow write queue is not empty and drop the related warnings. Reported-by: Christoph Paasch <[email protected]> Closes: multipath-tcp/mptcp_net-next#444 Fixes: f70cad1 ("mptcp: stop relying on tcp_tx_skb_cache") Cc: [email protected] Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 36a8738 ] The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)ffff80001b894048 insn + 2039 = (struct bpf_insn *)ffff80001b898000 <- end of the page In the build_insn() function, we are trying to access next instruction unconditionally, i.e. `(insn + 1)->imm`. The address lies in the next page and can be not owned by the current process, thus an page fault is inevitable and then segfault. So, let's access next instruction only under `dst = imm64` context. With this fix, we have: # ./test_tag test_tag: OK (40945 tests) Fixes: bbfddb9 ("LoongArch: BPF: Avoid declare variables in switch-case") Tested-by: Tiezhu Yang <[email protected]> Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit ab9e0c5 upstream. If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump to the err_out label, which will call devres_release_group(). devres_release_group() will trigger a call to ata_host_release(). ata_host_release() calls kfree(host), so executing the kfree(host) in ata_host_alloc() will lead to a double free: kernel BUG at mm/slub.c:553! Oops: invalid opcode: 0000 [frank-w#1] PREEMPT SMP NOPTI CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 frank-w#47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:kfree+0x2cf/0x2f0 Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246 RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320 RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0 RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780 R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006 FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? kfree+0x2cf/0x2f0 ? exc_invalid_op+0x50/0x70 ? kfree+0x2cf/0x2f0 ? asm_exc_invalid_op+0x1a/0x20 ? ata_host_alloc+0xf5/0x120 [libata] ? ata_host_alloc+0xf5/0x120 [libata] ? kfree+0x2cf/0x2f0 ata_host_alloc+0xf5/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Ensure that we will not call kfree(host) twice, by performing the kfree() only if the devres_open_group() call failed. Fixes: dafd6c4 ("libata: ensure host is free'd on error exit paths") Cc: [email protected] Reviewed-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Niklas Cassel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump to the err_out label, which will call devres_release_group(). devres_release_group() will trigger a call to ata_host_release(). ata_host_release() calls kfree(host), so executing the kfree(host) in ata_host_alloc() will lead to a double free: kernel BUG at mm/slub.c:553! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:kfree+0x2cf/0x2f0 Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246 RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320 RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0 RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780 R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006 FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? kfree+0x2cf/0x2f0 ? exc_invalid_op+0x50/0x70 ? kfree+0x2cf/0x2f0 ? asm_exc_invalid_op+0x1a/0x20 ? ata_host_alloc+0xf5/0x120 [libata] ? ata_host_alloc+0xf5/0x120 [libata] ? kfree+0x2cf/0x2f0 ata_host_alloc+0xf5/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Ensure that we will not call kfree(host) twice, by performing the kfree() only if the devres_open_group() call failed. Fixes: dafd6c4 ("libata: ensure host is free'd on error exit paths") Cc: [email protected] Reviewed-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Niklas Cassel <[email protected]>

commit ab9e0c5 upstream. If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump to the err_out label, which will call devres_release_group(). devres_release_group() will trigger a call to ata_host_release(). ata_host_release() calls kfree(host), so executing the kfree(host) in ata_host_alloc() will lead to a double free: kernel BUG at mm/slub.c:553! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:kfree+0x2cf/0x2f0 Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246 RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320 RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0 RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780 R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006 FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? kfree+0x2cf/0x2f0 ? exc_invalid_op+0x50/0x70 ? kfree+0x2cf/0x2f0 ? asm_exc_invalid_op+0x1a/0x20 ? ata_host_alloc+0xf5/0x120 [libata] ? ata_host_alloc+0xf5/0x120 [libata] ? kfree+0x2cf/0x2f0 ata_host_alloc+0xf5/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Ensure that we will not call kfree(host) twice, by performing the kfree() only if the devres_open_group() call failed. Fixes: dafd6c4 ("libata: ensure host is free'd on error exit paths") Cc: [email protected] Reviewed-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Niklas Cassel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

gregkh and others added 30 commits October 9, 2018 09:17

usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platforms

c02588a

Intel Apollo Lake has the same internal USB role mux as Intel Cherry Trail. Cc: <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Merge tag 'kvmarm-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/l…

4cebf45

…inux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for 4.19, take #2 - Correctly order GICv3 SGI registers in the cp15 array

net: ena: fix auto casting to boolean

248ab77

Eliminate potential auto casting compilation error. Fixes: 1738cd3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <[email protected]> Signed-off-by: David S. Miller <[email protected]>

sparc: Wire up io_pgetevents system call.

7c26701

Signed-off-by: David S. Miller <[email protected]>

MAINTAINERS: update the SELinux mailing list location

073c1a7

Signed-off-by: Paul Moore <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

4.19 into master #47

4.19 into master #47

frank-w commented Oct 22, 2018

4.19 into master #47

4.19 into master #47

Conversation

frank-w commented Oct 22, 2018