Pinebook Pro keyboard/touchpad firmware updater

This application does upgrade firmware of the built-in keyboard and touchpad.

Compiling

git clone https://github.com/jackhumbert/pinebook-pro-keyboard-updater
cd pinebook-pro-keyboard-updater
sudo apt-get install build-essential libusb-1.0-0-dev xxd
make

On Arch/Manjaro:

git clone https://github.com/jackhumbert/pinebook-pro-keyboard-updater
cd pinebook-pro-keyboard-updater
sudo pacman -Syy base-devel libusb vim
make

Pick right keyboard model

Pinebook Pro offers two keyboard types: iso and ansi.

Append your model type after the step-1 or step-2 command specifying iso or ansi.

In order to update with ansi keyboard the external keyboard will be required as for the duration of the process the keyboard will stop working.

Update all firmwares

You need to do all of that in correct order, if at any point process fails, start it from point 1.:

1. Run step-1 iso or step-1 ansi of update process: sudo ./updater step-1 iso,
2. After step-1 iso or step-1 ansi touchpad will not work, keyboard works as normal (this is true only for ISO, the ANSI keyboard will not work after step-1),
3. Power your Pinebook Pro off with sudo poweroff and then power it on again,
4. After booting up, run step-2 iso or step-2 ansi of update process: sudo ./updater step-2,
5. Power your Pinebook Pro off with sudo poweroff and then power it on again,
6. After booting up, your keyboard and touchpad firmware should be updated.

Revised firmware

There has been some effort in firmware/ to reverse engineer and customise the existing firmware, fixing some of the common issues people are facing. Currently you need to flash this after steps 1 and 2 with a separate command, flash-kb followed by the .hex file location. No power cycling is required after flashing, but may be needed if your keyboard/touchpad is unresponsive (currently rare). Source code for each version can be found in firmware/src/.

# compile
git clone https://github.com/jackhumbert/pinebook-pro-keyboard-updater
cd pinebook-pro-keyboard-updater
sudo apt-get install build-essential libusb-1.0-0-dev xxd 
make

# For ISO keyboard
# step-1
sudo ./updater step-1 iso
sudo poweroff

# Turn your Pinebook Pro on again, then run step-2
sudo ./updater step-2 iso
sudo poweroff

# For ANSI keyboard
# step-1
sudo ./updater step-1 ansi
sudo poweroff

# Turn your Pinebook Pro on again, then run step-2
sudo ./updater step-2 ansi
sudo poweroff

# updating to the revised ansi firmware after steps 1 and 2
sudo ./updater flash-kb firmware/default_ansi.hex

# updating to the revised iso firmware after steps 1 and 2
sudo ./updater flash-kb firmware/default_iso.hex

Log from STEP-1

$ sudo ./updater step-1 iso
Running STEP-1...
[*] Flashing keyboard updater firmware...
>>> Fix hex file
[*] Opening in user mode...
>>> Trying to open VID:258a PID:001e...
>>> Device not found
>>> Trying to open VID:258a PID:001f...
[*] Sending command to switch to boot mode...
[*] Command send
>>> release interface
[*] Opening in boot mode
>>> Trying to open VID:0603 PID:1020...
>>> Device not found
>>> Trying to open VID:0603 PID:1020...
>>> Kernel Driver Active
[*] Erasing flash
[*] Writing firmware...
>>> USB: write_block_start (length=14336)
>>> USB: write_block (offset=0, length=2048)
>>> USB: write_block (offset=2048, length=2048)
>>> USB: write_block (offset=4096, length=2048)
>>> USB: write_block (offset=6144, length=2048)
>>> USB: write_block (offset=8192, length=2048)
>>> USB: write_block (offset=10240, length=2048)
>>> USB: write_block (offset=12288, length=2048)
>>> USB: write_block_start (length=14336)
>>> USB: write_block (offset=0, length=2048)
[*] Reading back firmware...
>>> USB: read_block_start (length=14336)
>>> USB: read_block (offset=0, length=2048)
>>> USB: read_block (offset=2048, length=2048)
>>> USB: read_block (offset=4096, length=2048)
>>> USB: read_block (offset=6144, length=2048)
>>> USB: read_block (offset=8192, length=2048)
>>> USB: read_block (offset=10240, length=2048)
>>> USB: read_block (offset=12288, length=2048)
[*] Comparing firmwares...
[*] Reseting device?
[*] Finished succesfully!
>>> release interface
[*] Please power your Pinebook Pro off then on again, then run `step-2`.

Log from STEP-2

$ sudo ./updater step-2 iso
Running STEP-2...
[*] Flashing touchpad firmware...
[*] Opening in touchpad mode
>>> Trying to open VID:258a PID:001f...
>>> Kernel Driver Active
>>> Writing offset:0 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:1024 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:2048 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:3072 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:4096 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:5120 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:6144 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:7168 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:8192 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:9216 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:10240 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:11264 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:12288 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:13312 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:14336 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:15360 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:16384 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:17408 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:18432 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:19456 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:20480 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:21504 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:22528 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:23552 length:1024...
>>> Verifying '1k-data'...
[*] Verifying 'end-program'...
[*] Verifying 'checksum'...
[*] Verifying 'program'...
[*] Finished succesfully!
>>> release interface
[*] Flashing ISO keyboard firmware...
>>> Fix hex file
[*] Opening in user mode...
>>> Trying to open VID:258a PID:001e...
>>> Device not found
>>> Trying to open VID:258a PID:001f...
[*] Sending command to switch to boot mode...
[*] Command send
>>> release interface
[*] Opening in boot mode
>>> Trying to open VID:0603 PID:1020...
>>> Device not found
>>> Trying to open VID:0603 PID:1020...
>>> Kernel Driver Active
[*] Erasing flash
[*] Writing firmware...
>>> USB: write_block_start (length=14336)
>>> USB: write_block (offset=0, length=2048)
>>> USB: write_block (offset=2048, length=2048)
>>> USB: write_block (offset=4096, length=2048)
>>> USB: write_block (offset=6144, length=2048)
>>> USB: write_block (offset=8192, length=2048)
>>> USB: write_block (offset=10240, length=2048)
>>> USB: write_block (offset=12288, length=2048)
>>> USB: write_block_start (length=14336)
>>> USB: write_block (offset=0, length=2048)
[*] Reading back firmware...
>>> USB: read_block_start (length=14336)
>>> USB: read_block (offset=0, length=2048)
>>> USB: read_block (offset=2048, length=2048)
>>> USB: read_block (offset=4096, length=2048)
>>> USB: read_block (offset=6144, length=2048)
>>> USB: read_block (offset=8192, length=2048)
>>> USB: read_block (offset=10240, length=2048)
>>> USB: read_block (offset=12288, length=2048)
[*] Comparing firmwares...
[*] Reseting device?
[*] Finished succesfully!
>>> release interface
[*] All done! Your keyboard and touchpad should be updated.

License

MIT, 2019, SHEN ZHEN HAI LUCK ELECTRONIC TECHNOLOGY CO., LTD