MaxFlow Test

Test the maximum printing speed of your extrusion system. The model can be scaled in X and Y to fit your buildplate. There is a small notch every 2 mm to indicate a speed change.

MaxFlow Test

SCAD MaxFlow Test Model

Associated Postprocessing Script

MaxFlow.py

Settings in the script for a Layer Height : 0.2

Printing Conditions

 - Nozzle Size          : 0.4
 - Line Width           : 0.6
 - Layer Height         : 0.25
 - Initial Layer Height : 0.25
 - Print Speed          : 100 mm/s

Printing Time = 20 minutes

Instructions

Print the test part. After the print is finished, check the quality of your wall. when they are under-extruded you have reach the maximum Flow Rate