XY Calibration Test part
This is a standardized model designed to validate correctness (it does not automatically calibrate for you). This model is focused on testing dimensional accuracy.
Default size of the test part is 150mmx150mm.
Licence for the standard calibration cube: CC BY-SA 3.0
- Nozzle Size : 0.4
- Layer Height : 0.2
- Initial Layer Height : 0.2
- Line Width : 0.4
- Wall Line Count : 2
- Top/Bottom Thickness : 0.8 mm
- Infill : 5%
- Infill Pattern : Lines
Printing Time = 1h20 mn
By printing the test part, you will be able to diagnose dimensional inaccuracy on the X and Y axis of your printer.
If the inaccuracy scales with the size of the test part, the cause is steps/mm of your steppers.
note: you may also want to adjust the flow or the xy expansion , and maybe redo some calibrations if the change is important.
