SkyView Pico. USB storage

Database and voice files installation

1. Power on the SkyView Pico and wait until completion of the boot sequence. Connect the device to a PC with USB cable ;

2. A pop-up message may come up to indicate that some disk needs to apply a certain format procedure. Confirm to format this storage with default FAT filesystem settings. Recommended volume name is DATA ;

3. Create Aircrafts folder on the virtual USB disk ;

4. Download most recent .CDB files that contains OGN aircrafts data from this location and/or FlarmNet data from that location ;

ATTENTION: Make sure that the files you've downloaded have valid size and MD5 hash ('checksum').

5. Copy ogn.cdb and/or fln.cdb file(s) into 'Aircrafts' folder. This is how the disk should look like:
   

6. Create Audio folder on the virtual USB disk ;

7. Download this ZIP file from that location ;

8. Extract files from the ZIP archive into the Audio folder. This is how the disk should look like:
   

9. Make safe disconnect of the SkyView Pico virtual disk from the PC.